Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pyro gauge

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 82
Joined: Thu Oct 30, 2008 7:34 pm
Location: caloundra

pyro gauge

Post by Glux »

im looking at getting a pyro gauge just wanting to know best brand to get and what sort of cost they are?
Top
Posts: 257
Joined: Sun Mar 25, 2007 7:44 pm
Location: D' Aguilar

Post by beast of a GQ »

There defiantly hard to find but check this guy out.
http://www.outerlimits4x4.com/ftopic201 ... highlight=

Seems cheap and looks pretty good. I got quoted $370 for a VDO guage at repco.

Cheers, Shane
04 GU Wagon 3L TD. 33's, 3" flexy coil lift. Kicker stereo, LOUD

GQ TD4.2 Extra Cab, 6" Flexy coil lift, Pro comps, 3rd's upper and lowers, 37 boggers. Plenty more to come.
Top
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Post by 5inchgq »

i've got myself a digital pyro got it at MTQ it's got a few different modes /memory etc cost $300 i chose it for the single degree increments personally i think the analogue ones are less accurate because they have a needle just my 2cents :)
Top
Posts: 73
Joined: Mon Feb 09, 2009 7:26 pm
Location: Hervey Bay/Brisbane

Post by Grylls »

Hey 5inch just wondering does that guage do C or just F? I want to get an autometer boost and pyro and it seems impossible to get a pyro in C. Eguages online have heaps and they are petty cheap since or dollar is pretty strong. Can get pillar pods on eBay also for $100-150.
Ryan

1990 HDJ80
Top
Posts: 82
Joined: Thu Oct 30, 2008 7:34 pm
Location: caloundra

Post by Glux »

i like the look of the digital autometer ones but want it in C not F
Top
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Post by 5inchgq »

far as i know (i havn't been told any different ) they are in C when i fitted the turbo etc etc old mate at MTQ told me don't get it any hotter than 520 deg so i assumed that all EGT's spoken of on here are in C ???Image measures ambient temp too hence the 28 :D
Top
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Post by 5inchgq »

i dug out the instructions as i vaguely remembered setting it up for C and lo and behold :D it can be set up for either. :armsup:
Top
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

5inchgq wrote:far as i know (i havn't been told any different ) they are in C when i fitted the turbo etc etc old mate at MTQ told me don't get it any hotter than 520 deg so i assumed that all EGT's spoken of on here are in C ???Image measures ambient temp too hence the 28 :D
i run one of these gauges as well, work very well and havnt had an issue with them.

a friend of mine is starting to supply them if you have questions pm me and ill faward on details.

cheers
Top
Posts: 80
Joined: Thu Jul 20, 2006 11:40 pm

Post by danaz »

Auber instruments do a nice one. Just google Auberins and they will come up. It does degrees F or C + has an alarm output. A bit over $100 aussie too which is pretty damn good.
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

Grylls wrote:Hey 5inch just wondering does that guage do C or just F? I want to get an autometer boost and pyro and it seems impossible to get a pyro in C. Eguages online have heaps and they are petty cheap since or dollar is pretty strong. Can get pillar pods on eBay also for $100-150.
There are a few Autometer pyros that read in celcius you jsut wont see them on US retailer web sites much. If you get on the US Autometer site and have a good look around they are there. Also I think from memory the Rocket Industries aussie site may show some, can't recall been a while. Generally the part number is the same it just has an "M" at the end to denote metric and therefore celcius. Once you havethe part number for the model you want it will be easier to get a retailer to chase it up.

Phantom - 5744-M
Sport Comp - 3344-M
Cobalt - 6144-M
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

I've foung the VDO to have very slow response and not worth the $$. Ususaly 40-50 degrees lower than the high speed on our dyno, takes 20 seconds at least to give a stable figure.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

PGS 4WD wrote:I've foung the VDO to have very slow response and not worth the $$. Ususaly 40-50 degrees lower than the high speed on our dyno, takes 20 seconds at least to give a stable figure.

Joel
Joel have you ever had opportunity to compare the Auber Instruments ones a lot of us have sourced from the States. They are being sold here by a mob online too and I'd been keen to know how good or bad they actually are as price is brilliant as are alarm or relay trigger features.
Top
Posts: 73
Joined: Mon Feb 09, 2009 7:26 pm
Location: Hervey Bay/Brisbane

Post by Grylls »

Had a look on Rocket and found this http://www.rocketindustries.com.au/desc ... o=AU3344-M
it's 2-1 / 16". Will that fit in a pillar pod off eBay? http://wap.ebay.com.au/Pages/ViewItem.a ... od&emvcc=0
They say they will fit 52mm guages which is two inches.

Cheers :)
Ryan

1990 HDJ80
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

Rocket industries are the place to go in Australia for Autometer gauges.
The Pyro is 3344-M
GU Patrol with go better bits added
Top
Posts: 73
Joined: Mon Feb 09, 2009 7:26 pm
Location: Hervey Bay/Brisbane

Post by Grylls »

Will that fit in that pillar pod mate?
Ryan

1990 HDJ80
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

Grylls wrote:Had a look on Rocket and found this http://www.rocketindustries.com.au/desc ... o=AU3344-M
it's 2-1 / 16". Will that fit in a pillar pod off eBay? http://wap.ebay.com.au/Pages/ViewItem.a ... od&emvcc=0
They say they will fit 52mm guages which is two inches.

Cheers :)
They are generally regarded as the same thing.

2" = 50.8mm
2 1/16" = 52.38mm
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

Grylls wrote:Will that fit in that pillar pod mate?
Yeah mate. Thats where mine are mounted.
GU Patrol with go better bits added
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 124 guests