Captive springs

[beinthemud]

Ok im thinking of cutting two slotts one on the inside of the bottom cradle and one on the outside,Maybe heating them and folding them over the spring.
Is this the way to do it ,Is there abetter way and what is it

Cheers Dwayne

[v840]

IIRC Grimace (?) ran industrial size cable ties on his Rangey for ages without a problem.

[rockcrawler31]

superior make a decent set that bolt in, which i bought simply because i didn't have the time to make a set myself.

but you could easily enough make a reasonable facsimile of them.

[SuperiorEngineering]

link to the toyota - http://www.superiorengineering.com.au/p ... ts_id=5360


link to the nissan -
http://www.superiorengineering.com.au/p ... ts_id=5360

These just bolt through the original hole in the diff.

[beinthemud]

link to the toyota - http://www.superiorengineering.com.au/p ... ts_id=5360


link to the nissan -
http://www.superiorengineering.com.au/p ... ts_id=5360

These just bolt through the original hole in the diff.

Wow cool now you should give me a set for my bundy for making a thread were you can get a plug in for your buisness

[SuperiorEngineering]

sweet plug , i need more guys like you on the forum.

[beinthemud]

sweet plug , i need more guys like you on the forum.

Send me a set and ill put a link on my profile and in my sig line
Ill tell everyone i can how great you are

[rockcrawler31]

link to the toyota - http://www.superiorengineering.com.au/p ... ts_id=5360


link to the nissan -
http://www.superiorengineering.com.au/p ... ts_id=5360

These just bolt through the original hole in the diff.

Wow cool now you should give me a set for my bundy for making a thread were you can get a plug in for your buisness

Hey hey wooo there Hoss!!

I think you'll find I gave the first plug so any freebies are going on MY car. Please PM me for the address to send the new coilovers to thank you.

[beinthemud]

link to the toyota - http://www.superiorengineering.com.au/p ... ts_id=5360


link to the nissan -
http://www.superiorengineering.com.au/p ... ts_id=5360

These just bolt through the original hole in the diff.

Wow cool now you should give me a set for my bundy for making a thread were you can get a plug in for your buisness

Hey hey wooo there Hoss!!

I think you'll find I gave the first plug so any freebies are going on MY car. Please PM me for the address to send the new coilovers to thank you.

Yes but i made the thread ,So maybe he could send us both what we want and we could tell each other how great he is

[rockcrawler31]

Piss funny.

It's like an internet circle jerk

[Yom]

I think grimace's idea was more profitable.

[rockcrawler31]

I think grimace's idea was more profitable.

No you're getting it mixed up with a man train if your thinking of grimace

[Josh_GQ]

A man train? that festival is coming up soon in sydney i think you would be better off there.

p.s you disgust me

[beinthemud]

I think grimace's idea was more profitable.

No you're getting it mixed up with a man train if your thinking of grimace

[rockcrawler31]

p.s you disgust me

My work here is done now

[80's_delirious]

superior make a decent set that bolt in, which i bought simply because i didn't have the time to make a set myself.

but you could easily enough make a reasonable facsimile of them.

wouldnt it be more convenient to email them rather than facsimile?

[beinthemud]

superior make a decent set that bolt in, which i bought simply because i didn't have the time to make a set myself.

but you could easily enough make a reasonable facsimile of them.

wouldnt it be more convenient to email them rather than facsimile?

Probably have to scan them first, then maybe put a link from photo bucket

[lukes4x4]

to me your shocks are to short or incorrectly mounted > correct this and no need to bolt your shocks in !

[mike_nofx]

^ too long...

[lukes4x4]

oops to long ! haha

[beinthemud]

to me your shocks are to short or incorrectly mounted > correct this and no need to bolt your shocks in !

Wow

[Micka]

to me your shocks are to short or incorrectly mounted > correct this and no need to bolt your shocks in !

Wow

How good is that!!!!

You don't have to bolt shocks in anymore



I'm pretty sure he means no need to retain your springs, but really, you should be retaining them top and bottom to give your rig more stability. Having said that, I have had dislocation cones on my last 2 rigs without problems.

[beinthemud]

Yup i think hes drunk and stupid

[sudso]

Why not just run shocks that wont allow the springs to become loose? Once they're loose there's bugger all tyre pressure on the ground for traction anyway.

[lukes4x4]

sorry guys springs don`t need to be bolted in. i`m sure you get the idea what i was saying, but the intelligence of some of you people is so far advance from myself that you don`t have the commonsence of how to make springs captive ? if your got so much time on your hands to knitpick every word typed on these forums why not go teach it to kids at school. if you don`t want top do that f#%k off.