Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tough Tracks 2010 - Round 1

Post all your Competition and Event info here.

Moderator: evanstaniland

Post Reply
Posts: 125
Joined: Sat Jan 21, 2006 2:19 pm
Location: brisbane

Post by green4x4 »

Tough Tracks:
Round 1: 6 -7 March Janowen hills
Round 2: 12-13-14 June Emu Creek
Round 3: 25-26 sept Landcruiser Mountain Park



http://www.toughtracks4wdclub.org/forum ... p?f=5&t=92



TRY THIS LINK
Posts: 7
Joined: Tue Jun 05, 2007 7:36 pm

TOugh Tracks Rd 1

Post by pinkfloyd7 »

We will be holding a ANZAC Day service out of respect on the sunday and yes Monday is a Holiday

See you all there it will be a graet weekend

The Treasurer

PS Get your Mobile numbers to the club so we can put you on our new sms service
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Can we run 40's yet?
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 326
Joined: Thu Sep 30, 2004 6:37 pm
Location: Capalaba

Post by bowtie landie »

WICKED wrote:Can we run 40's yet?
Ben, if you go to 40cm tyres your diffs will be draging on the ground. I reckon you stick with what you got. :lol:

Pete
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

bowtie landie wrote:
WICKED wrote:Can we run 40's yet?
Ben, if you go to 40cm tyres your diffs will be draging on the ground. I reckon you stick with what you got. :lol:

Pete
What I got is 40inch sticky's. Thanks for the Confirmation Peter! See you there!

Glad to see the club moving with the times!
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 326
Joined: Thu Sep 30, 2004 6:37 pm
Location: Capalaba

Post by bowtie landie »

WICKED wrote:
bowtie landie wrote:
WICKED wrote:Can we run 40's yet?
Ben, if you go to 40cm tyres your diffs will be draging on the ground. I reckon you stick with what you got. :lol:

Pete
What I got is 40inch sticky's. Thanks for the Confirmation Peter! See you there!

Glad to see the club moving with the times!
Mate, strap the sticky's to the sides - like a bumper car. Is Scotty going to navy for you? - you're going to need them.

If you REALLY DO want to run 40s we can put it to the club for a vote - there are probably a few guys that want to go up a tyre size. If you want to get some names together to show who's interested then we have no problem discussing it at a committee meeting & puting it to the vote.

Pete
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

I am serious
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

WICKED wrote:Can we run 40's yet?
I've been running my 40 series for a couple of years now, hasn't been a problem... I thought you had a nissan?
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Ricko wrote:
WICKED wrote:Can we run 40's yet?
I've been running my 40 series for a couple of years now, hasn't been a problem... I thought you had a nissan?
40 inch tyres dude
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Ricko wrote:
WICKED wrote:Can we run 40's yet?
I've been running my 40 series for a couple of years now, hasn't been a problem... I thought you had a nissan?
:rofl: :rofl:
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

WICKED wrote:
Ricko wrote:
WICKED wrote:Can we run 40's yet?
I've been running my 40 series for a couple of years now, hasn't been a problem... I thought you had a nissan?
40 inch tyres dude
:finger:

Hope you make it out there mate. :D
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Ricko wrote:
WICKED wrote:
Ricko wrote:
WICKED wrote:Can we run 40's yet?
I've been running my 40 series for a couple of years now, hasn't been a problem... I thought you had a nissan?
40 inch tyres dude
:finger:

Hope you make it out there mate. :D
have a look in here dude


http://www.outerlimits4x4.com/ftopic655-270.php
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

Sounds like you lads had a good weekend! Can't see any panel damage that couldn't be buffed out. Any major mechanical issues??? Otherwise see you in a few weeks hey? You could always be a spectator...
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Ricko wrote:Sounds like you lads had a good weekend! Can't see any panel damage that couldn't be buffed out. Any major mechanical issues??? Otherwise see you in a few weeks hey? You could always be a spectator...
Dude had a farily big roll over...
Bent a front shaft but that was an easy fix.

Get 40's in and yes.....
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

How do I get the rule changed?
What do I need signed??
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

You can run 40's if I can use my front digs!! :finger:
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

with the addition of mod class I can't see you challenge can't step up the anty a bit. Tracks are getting harder and harder each round so why not.
;)
Posts: 135
Joined: Tue Jun 10, 2008 8:44 am
Location: Greenbank

Post by patrol2pathy »

WICKED wrote:How do I get the rule changed?
What do I need signed??
I guess the easiest way would be like Pete said.

Come to the April club meeting & bring it up.

If there is enough support for it, a vote will probably follow :D
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

just cruizin' wrote:with the addition of mod class I can't see you challenge can't step up the anty a bit. Tracks are getting harder and harder each round so why not.

My thoughts exactly
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

How many registered cars are there in seq running 40" tyres that would enter? And most prob have a lot of other mods like cutting brakes, rear disconnect, full hydro steering, rear steer, portals and no rego. I think for a 40" class your going to have to do more than just up the tyre size to make it worth while.

I think if you could get a class that suits the above mods you would get the support.
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Well now that there is the 3rd class of 35's, dual lockers, etc why have a class 38.5 class? Why not step it up too take 40's, cutting brakes, Half door's, maybe rear disconnect. (I disagree with portals but Ruff, they are a massive thing to buy, fit and get working. By 40's, cut the gaurds, drive it)

There is an Entry Level (trophy), Medium Level (Mod i think it's called) and just above Mod (Challange)

All I can see different between Mod and Challange is lift and tyre size.

I REALLY REALLY Don't want to go back to 37's and full door's!!

If you are will too/would like to see a change in the above rule's please PM or email or call me. I will be calling Peter Kitchen, Alan, and other numbers I have or can get hold off to make this happen!

Is the next club meeting on the 7th??
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

I have just called Peter Kitchen and have had a quick chat about it all.

I will be asking the club too look at 40's, half doors and cutting brakes as a starting point. We can look at rear disconnect after that Aaron :lol:

Please PM, Email, attended the next club meeting or even post your name/support here if you would like too.

Thank all
Ben
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Post by sloshy »

Willy Hilux wrote:You can run 40's if I can use my front digs!! :finger:
X2, only way I would agree with it :finger:
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

sloshy wrote:
Willy Hilux wrote:You can run 40's if I can use my front digs!! :finger:
X2, only way I would agree with it :finger:
Baby steps boy's!
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 83
Joined: Fri Oct 06, 2006 8:30 pm
Location: gold coast

rules

Post by huub »

not competing this year but would make sense to up challenge a bit :P
http://www.turboshop.com.au/
Austyre Ashmore
Posts: 255
Joined: Mon Jan 21, 2008 2:22 pm
Location: Brisbane

Re: rules

Post by Bruceh »

huub wrote:not competing this year but would make sense to up challenge a bit :P
I hope your still coming to watch huub. ;)
Cheer us little zooks on :finger: ;)
"Team Casper"
Go the mighty Zook
The only motor sport we spend money on to go slower.
Posts: 83
Joined: Fri Oct 06, 2006 8:30 pm
Location: gold coast

Re: rules

Post by huub »

Bruceh wrote:
huub wrote:not competing this year but would make sense to up challenge a bit :P
I hope your still coming to watch huub. ;)
Cheer us little zooks on :finger: ;)
ill hope to be there ill cheer you on :P
http://www.turboshop.com.au/
Austyre Ashmore
Posts: 750
Joined: Mon Aug 25, 2008 12:06 am
Location: gold coast

Post by johnsy86 »

i do not compete but might do in the future and i agree with some posts that with the inclusion of mod class why not up the ante with challenge class, id vote for 40s even tho id probly only run 37s.
Lj80 tuff truck "mr Grumpy"
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Ok after many calls today there is a few things too look at.

WE NEED Votes, Name's, Number's of any and all Club and NON Club Members that would support the rule change. I will also try looking into insurance as I am told that, that is the biggest issue.

I will be writting a letter and need all the above info

Who support's the change -

Myself
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

I support any changes to Challenge class also. To combat insurance issues, why not increase the safety requirements of the cars? Better roll cage systems and harnesses for example. Most cars have these already in challenge I think anyway.
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], Majestic-12 [Bot] and 50 guests