I have a warn m8000 winch and i am mainly using it to winch the front of the car down to the diff. As soon as i stop winching in, it slowly backs itself off as it is under load. There doesnt seem to be any locking mechanism.
Has anyone had this problem before.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
warn winch wont lock up
Moderator: -Scott-
warn winch wont lock up
Michael DePasquale
MB: 0411331924
MB: 0411331924
Sounds like a problem with the brake assy inside the drum. I assume it is a low mount winch? Could be a range of things - oil and/or mud inside the drum and coating the brake cone, broken brake assy, worn friction surfaces. I would pull it apart and have a look - pretty simple assy. If there is anything wrong, it will be evident really easily. The guys at ARB overhauled my 8000lb lowmount as I had a worn seal which mud and crap into the brake and buggered it completely. I think the parts were about $150 and labour $75 - was a while ago.
Hope his helps
Hope his helps
crazy eyes,
this is a new one for me. If its a cone brake it should not make a difference. I understand the cable is normally wound onto the drum from the under side, but thought this was more for alignment with the fairlead.
So the brake on a low mount only works when you are pulling up a hill? - what happens if you need to winch backwards - is the vehicle un-controlled as such and the brake wlll not lock it up?
Just curious.
thanks
this is a new one for me. If its a cone brake it should not make a difference. I understand the cable is normally wound onto the drum from the under side, but thought this was more for alignment with the fairlead.
So the brake on a low mount only works when you are pulling up a hill? - what happens if you need to winch backwards - is the vehicle un-controlled as such and the brake wlll not lock it up?
Just curious.
thanks
Master of my own domain
Nope, because the load on the drum is still in the same direction.PBBIZ2 wrote:crazy eyes,
this is a new one for me. If its a cone brake it should not make a difference. I understand the cable is normally wound onto the drum from the under side, but thought this was more for alignment with the fairlead.
So the brake on a low mount only works when you are pulling up a hill? - what happens if you need to winch backwards - is the vehicle un-controlled as such and the brake wlll not lock it up?
Just curious.
thanks
Who is online
Users browsing this forum: No registered users and 4 guests