I was underneath the patrol this arvo and have seen a hose hanging down next to the gearbox, it runs up above the gearbox, connects to a steel line and eventually into the engine bay.
It also connects to the front diff, and into the front left guard.
So where exactly should this pictured hose connect to? Im assuming its a gearbox or transfer breather.
Do the diffs require modified breathers? as the front one looks quite good, havent checked out the rear.
First pic is the hose, Second pic is where it connects up to.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Where should this breather connect to?
Master of my own domain
Yeah thats definatly the front diff and gearbox breathers, they are pretty good stock, (espcially when you have 7" total extra lift) Running right up into the engine bay. The rear one runs into the rear 1/4 panel.
Couldn't tell you excatly where it goes on the gearbox tho. Get a torch and have a look.
Couldn't tell you excatly where it goes on the gearbox tho. Get a torch and have a look.
GQ 5" coils 35" Muds FOR SALE
98 GU 4500 ST Stock.
98 GU 4500 ST Stock.
Re: Where should this breather connect to?
mike_nofx wrote:I was underneath the patrol this arvo and have seen a hose hanging down next to the gearbox, it runs up above the gearbox, connects to a steel line and eventually into the engine bay.
It also connects to the front diff, and into the front left guard.
So where exactly should this pictured hose connect to? Im assuming its a gearbox or transfer breather.
Do the diffs require modified breathers? as the front one looks quite good, havent checked out the rear.
First pic is the hose, Second pic is where it connects up to.
by the looks of the hose being on that side of the box i would say its coming from the t/case,there is a fitting beetween the the 4wd shifter an the gearshifter little t peice! ontop of the box could be a prick to get too,
but it runs from the t/case to the g/box then down the side of the box an up the rail an into the engine bay hope this make sense
steve
Who is online
Users browsing this forum: No registered users and 139 guests