Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

werid clunk/click when steering.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 41
Joined: Tue Jan 19, 2010 5:15 pm
Location: brisbane

werid clunk/click when steering.

Post by vitopatrol »

when i drive my gq patrol, it has a 5inch lift, when i turn left hard i get a werid clunk/ click, its only once doesnt keep clicking or clunking.

ive been under looked around nothing seems loose, any ideas?
Posts: 172
Joined: Fri Aug 19, 2005 5:34 pm
Location: Melbourne

Post by BushTuckerNed »

could be worn body mounts or cracked floor where it meets the firewall in the front footwells
www.mudrhino.com.au
Posts: 257
Joined: Thu Nov 27, 2003 10:22 pm
Location: Stanthorpe- QLD

Post by Snarba »

might be bushes on panhard or main control arms, do you feel the clunk kinda under your feet? Best get a mate to slowly turn the wheel from side to side and look for any movement in the suspension links
I've got a WEAPON OF MOSS DETRUCTION
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

Does it do a bit of a boing noise as well. Common for the front coils to move around a little.

Or else the body mounts. The one under your feet you should feel. They move most when wet. Hit it with the hose and go for a drive.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Posts: 195
Joined: Fri Oct 03, 2008 9:45 pm
Location: YES

Post by THICKNICK »

mine does it too, very annoying.

it started when i put in my radius arms to suit the lift, am putting standard ones back in this weekend, so will see if it goes away.
stainless and aluminium polishing northside brisbane. pm for details
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

tightening my steering box back to the chassis became a fortnightly thing for me on my 93 GQ. Would make the same noises.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest