Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help wheel bearings keep coming loose

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 76
Joined: Fri Mar 14, 2008 3:46 pm
Location: caboolture

help wheel bearings keep coming loose

Post by damo13 »

well as above i changed my wheel bearings and now for some reason they keep coming loose as soon as a drive about 100 meters i cant work it out ive re done it about 5 times and the same thing any ideas please
suprise cockface its a rodeo
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

bent the ears back on the locktabs?

Got them tight enough?

Have them in the correct order?
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Threads stripping in nuts or shaft?
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

What vehicle/model?
What sort of locking mechanism? (pix)
How are you setting the preload?
Do you have large offset rims on a nissan?

Bazzle
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Appears to be a GU according to the thread of the same name and content in the nissan forum.

http://www.outerlimits4x4.com/sutra1860 ... t=#1860187
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

Are you sure you knocked the new bearing cones home?

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

put the screws back in the locking tab?
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 43
Joined: Wed Sep 24, 2008 2:36 pm
Location: perth

Post by rusty bus »

Looked at the back of the knuckle as you check wheel bearing freeplay to make sure its not actually your swivel hub bearings which have the freeplay??
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

rusty bus wrote:Looked at the back of the knuckle as you check wheel bearing freeplay to make sure its not actually your swivel hub bearings which have the freeplay??
Good thinkin 99
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests