Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

84 4runner rear window switch power source?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

84 4runner rear window switch power source?

Post by 83zook »

Hi my rear window has been an intermittent problem, but now it wont go up at all.. I pulled the console out and probed the switch and i've got no power at the switch.. So what i want to know is where the switch gets its power from?
cheers
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

i guess you dont have the haynes manual for it then?
The relay is behind the passenger seat and between the rear seat panel on the side.
the switch will get the power from there to turn it on and off as the relay swaps the power supply to the poles on the motor for it to go up or go down.
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

Post by 83zook »

cheers ill go have a squiz now thanks
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

mine did this. i tryed everything to no prevale so wat i did was take the center console bit out. its like 4 screws inside the bottom storage bit. pull this off and then u can pull off the palstic around ur gear lever and also the part with the rear window switch on it. under this part there is two plugs. mine were fairly dusty being below the center console alot of sh!t goes down there. clean them off and give it a go. it fixed mine. hope this helps
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Posts: 180
Joined: Sat Oct 07, 2006 7:45 am
Location: Mudgee, NSW

Post by 83zook »

thanks everyone for your help
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
Post Reply

Who is online

Users browsing this forum: No registered users and 145 guests