Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

VIC-Trailer stub axle & blank/flangeless hub - where to

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

VIC-Trailer stub axle & blank/flangeless hub - where to

Post by dogbreath_48 »

I'm building a swing away tyre carrier and was planning on using a trailer stub axle/spindle (which should press into 50x50mm rhs) for the pivot. I can get a hold of the stub easily enough but can't get a hold of a blank hub (I.e. No flange - basically a tube the bearings are pressed into) to weld the swing arm onto. I don't want to buy a complete hub and cut the flang off as I'll have difficulty welding to the cast steel.

I'm sure i've seen these available before but am having trouble tracking one down. Does anyone know who may stock them around Melbourne? Preferably eastern suburbs. I've tried the trailer factory in kilsyth and they didn't have much of an idea of what i'm after. I'd rather not buy online as I want to have it tomorrow.

Do induro/cheesy, kaymar etc bars use this setup?


...or anyone got any better ideas? Obviously I couldd get something made up but I could do without the hassle.
Last edited by dogbreath_48 on Tue Apr 06, 2010 6:59 pm, edited 3 times in total.
Tetanus rolling on 37's
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Image
@ http://www.trailerparts.net.au/

A bit more searching found this; exactly what im after. The supplier is in WA which isn't ideal.
Tetanus rolling on 37's
Posts: 68
Joined: Thu May 21, 2009 8:27 pm
Location: tassie

Post by brissle »

have a look at ebay under spare wheel carrier , there are kits on there with stub axle hub and wheel mount , i cant put urls on here yet
Posts: 238
Joined: Fri Aug 24, 2007 8:57 pm
Location: Frankston Melbourne

Post by steveoo »

go down to pick pay and go (in ringwood) and just look along the fence line (opposit side to where you walk in)

The other week they had some spare wheel carriers off random cars just on the ground i bought one $15 worth the look!
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

There is a seller in Braeside, $75 per set. I use their parts and they work OK.

http://cgi.ebay.com.au/SWING-AWAY-SPARE ... 27ab9e96f9
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Struth wrote:There is a seller in Braeside, $75 per set. I use their parts and they work OK.

http://cgi.ebay.com.au/SWING-AWAY-SPARE ... 27ab9e96f9
thanks struth. Don't suppose you have any contact details for this fella do
you? When you say 'they work ok', do you mean to say they're not the best? If so what's wrong with them?

Edit: I gotto stop browsing on my phone and searching/reading
properly! For anybody elses info:
37 Downard Street Braeside Melbourne 3195. Contact John Stanhope on 0408 592 904
Tetanus rolling on 37's
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

dogbreath_48 wrote:
Struth wrote:There is a seller in Braeside, $75 per set. I use their parts and they work OK.

http://cgi.ebay.com.au/SWING-AWAY-SPARE ... 27ab9e96f9
thanks struth. Don't suppose you have any contact details for this fella do
you? When you say 'they work ok', do you mean to say they're not the best? If so what's wrong with them?

Edit: I gotto stop browsing on my phone and searching/reading
properly! For anybody elses info:
37 Downard Street Braeside Melbourne 3195. Contact John Stanhope on 0408 592 904
They work fine and there is no quality issues with the two I used.
I guess they are just a weldable stub axle so they either work or they don't :D
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Struth wrote:
They work fine and there is no quality issues with the two I used.
I guess they are just a weldable stub axle so they either work or they don't :D
that's what I figured ;) picked one up today, thanks for the help!
Tetanus rolling on 37's
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

h

Post by Clanky »

I bought the one from trailerparts in WA. They posted it over to Sydney no dramas, wasnt too exy.
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

How have you fixed the other end of the swing away to the bar? What sort of catch are you using?
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

lump_a_charcoal wrote:How have you fixed the other end of the swing away to the bar? What sort of catch are you using?
over the center latch from a local industrial supplier, rrp was around $120 :shock: i know you can get them for less, though.

Image
Tetanus rolling on 37's
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

From the trailer/caravan supply joint on Franga Dandy road Dandy, from mempry about $18 each.

Image
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Struth, picsorbus!
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

lump_a_charcoal wrote:Struth, picsorbus!
I can see the pic I posted with the original post :? :?


You going blind or sumptin :finger:
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests