Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
reduction grears from locktup4x4?
reduction grears from locktup4x4?
dose any one run trail creeper 6.5:1 from http://locktup4x4.com.au/suzuki-sierra- ... train-109/
or the 4.16:1 from the same place (i know they are two differnt brands) im just looking for some opinions and some idear on how good they are
or the 4.16:1 from the same place (i know they are two differnt brands) im just looking for some opinions and some idear on how good they are
93 wt zook: Lux diffs, lockright, g16b mpfi, 33's and saggy ass springs
cool so the 6.5's are tough but what are they like on the road (cause mine is still a daily) what sort of rpm are you doing at 110km/h, the 20% reduction on hi range worry's me a little
and dose any one run the atlas gears from locktup4x4 cause im interested in these, as i under stand they only affect low range. but they nearly cost the same (any opinion is good)
and dose any one run the atlas gears from locktup4x4 cause im interested in these, as i under stand they only affect low range. but they nearly cost the same (any opinion is good)
93 wt zook: Lux diffs, lockright, g16b mpfi, 33's and saggy ass springs
I put probably 15000km on a set of 6.5s on the highway. They're now getting a beating under Matt's Cut4b trail rig. RPM at 100 on a 31 was nearly the same as stock on a 26 with 3.7 diff gears.4wheeljive wrote:cool so the 6.5's are tough but what are they like on the road (cause mine is still a daily) what sort of rpm are you doing at 110km/h, the 20% reduction on hi range worry's me a little
and dose any one run the atlas gears from locktup4x4 cause im interested in these, as i under stand they only affect low range. but they nearly cost the same (any opinion is good)
What gearing do you run in the diffs?
-Mal
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
I have blown up a few .. not really punishing em either ...BGH wrote:excuse my ignorance but how the hell did you break a rockhopper gear set ??????
only reason i ask is i have rockhopper myself but not in a zook......sorry just browsing thru the post
cheers
BGH
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
i run the trail gear 6.5's with 3.9 diffs turning 32 pedes daily driver. in high range and standard motor 110km's is a bit of a myth to me so yeah. but as far as low range goes they r brilliant, been running them 4 6 months now with no drama's at all. Can not fault them in the bush or the beach. And there easy enough to fit urself saving more $$$'s
4 wheel jive you will have 4.3 diff centres unless they were changed previously for some reason so with the 6.5s itd be pretty revy up the road,but crawling would be sweet.
my old zuk used to sit on 3750(ish) with 6.5s and 3.7 diffs with 31" muddies.
my old zuk used to sit on 3750(ish) with 6.5s and 3.7 diffs with 31" muddies.
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
The 6.5's with 31' tyres are a great combination with standard diffs. Cant remember RPM's, but they arent near redline in 5th at 110. If you are running larger tyres, the 20% reduction is great, but if you are running standard 26' tyres (face it who does), then the reduction might send youre RPM's to the annoying side at highway speed.4wheeljive wrote:cool so the 6.5's are tough but what are they like on the road (cause mine is still a daily) what sort of rpm are you doing at 110km/h, the 20% reduction on hi range worry's me a little
and dose any one run the atlas gears from locktup4x4 cause im interested in these, as i under stand they only affect low range. but they nearly cost the same (any opinion is good)
I run 4.16's with 235/75/15 BFG's (30's) and stock WT diffs (3.7 i believe). I'd say its a 65/35 split between the gears and locker for best additions I've made. Cos I'm running a turbo GTi set up and redline is set to 7800rpm, previously I could do about 140km/h @7800rpm in low range, now its about 65km/h @7800rpm, which makes my low 3rd about what my stock low 1st was with 30's. You could say its given me atleast 2 extra gears. It just wont die in low range and with 1st equalling about 1km/h per 1000rpm its no surprise.
Because my rubber is approx 11% larger than stock the 12% reduction in high has brought my high range back to stock, so rev's on the road dont change with 30's, from memory about 3600 at 110km/h, does that sound right??
Because my rubber is approx 11% larger than stock the 12% reduction in high has brought my high range back to stock, so rev's on the road dont change with 30's, from memory about 3600 at 110km/h, does that sound right??
I think mine is being freighted via USPSPJ.zook wrote:Nice work oozuk. They usually ship to Aus via DHL, and i usually see the goods in a matter of days from ordering.
I'm told it should be approx 10 days. I feel like a little kid on Christmas eve , dying to unwrap the new gifts LOL
Trying to finish the Zook
OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Sierra transfer cases and other zook stuff
Hey guys I am in the north/west sydney area (baulkham hills If you know it) and I build and modify sierra transfers on the weekends. I cant even tell you how many I have re-bearinged. I have built plenty of 6.5s units. I know most of you can do the 6.5s your self but let me know if any of you out there need it build for you.
I do the work cheap and I quite often take other goods as payment
$140 to go through it and replace all bearings and seals.
$180 to install any new gears using old bearings with old seals.
$200 to replace all bearings seals an install new gearing.
$10-20 extra to install into any standard cradle
$80 to install a rocktoy ring ( I re-enforce the mounts at the same time.)
$25 to clean your old case and Paint it after all work is done
$80-150 to remove and install your case if you want me to do it all for you. This price will depend on how modified and or how hard it is to get out.
I can supply all bearings and seals for $85
I will supply gear oil at what ever price I can get it if needed.
I can often get my hands on plenty of other zook parts and I do other zook related work let me know if I can help anyone out.
0449256629
Ohhhh and I am also a Snap-On dealer let me know if any of you need any tools.
I do the work cheap and I quite often take other goods as payment
$140 to go through it and replace all bearings and seals.
$180 to install any new gears using old bearings with old seals.
$200 to replace all bearings seals an install new gearing.
$10-20 extra to install into any standard cradle
$80 to install a rocktoy ring ( I re-enforce the mounts at the same time.)
$25 to clean your old case and Paint it after all work is done
$80-150 to remove and install your case if you want me to do it all for you. This price will depend on how modified and or how hard it is to get out.
I can supply all bearings and seals for $85
I will supply gear oil at what ever price I can get it if needed.
I can often get my hands on plenty of other zook parts and I do other zook related work let me know if I can help anyone out.
0449256629
Ohhhh and I am also a Snap-On dealer let me know if any of you need any tools.
Re: Sierra transfer cases and other zook stuff
Are you the same VW Dave from Auszookers that couldn't get your engine to start due to dodgy timing and your solution to fix it was to replace the engine ?V.W.Dave wrote:Hey guys I am in the north/west sydney area (baulkham hills If you know it) and I build and modify sierra transfers on the weekends. I cant even tell you how many I have re-bearinged. I have built plenty of 6.5s units. I know most of you can do the 6.5s your self but let me know if any of you out there need it build for you.
I do the work cheap and I quite often take other goods as payment
$140 to go through it and replace all bearings and seals.
$180 to install any new gears using old bearings with old seals.
$200 to replace all bearings seals an install new gearing.
$10-20 extra to install into any standard cradle
$80 to install a rocktoy ring ( I re-enforce the mounts at the same time.)
$25 to clean your old case and Paint it after all work is done
$80-150 to remove and install your case if you want me to do it all for you. This price will depend on how modified and or how hard it is to get out.
I can supply all bearings and seals for $85
I will supply gear oil at what ever price I can get it if needed.
I can often get my hands on plenty of other zook parts and I do other zook related work let me know if I can help anyone out.
0449256629
Ohhhh and I am also a Snap-On dealer let me know if any of you need any tools.
"auszookers . com/index.php?name=Forums&file=viewtopic&t=7315"
.
Yep thats me...
But I replaced the block to go to a 1600. I couldn't get it started because it had 3 different kill switchs on it. As soon as I cut out all the extra blue lights, rock lights wiring, the kill switchs, turbo timer and a few other extra wires the previous owner put on it. It started up first crank.
Idiot all the same. It took me two weeks to figure it out. I hate wires they have always been my downfall.
But I replaced the block to go to a 1600. I couldn't get it started because it had 3 different kill switchs on it. As soon as I cut out all the extra blue lights, rock lights wiring, the kill switchs, turbo timer and a few other extra wires the previous owner put on it. It started up first crank.
Idiot all the same. It took me two weeks to figure it out. I hate wires they have always been my downfall.
Who is online
Users browsing this forum: No registered users and 3 guests