Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1hz engine id plate

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

1hz engine id plate

Post by Z()LTAN »

Is there an id plate on the engine at all? I need to get the 1hz production number because there are differences in my engine to the standard one. Flywheel is a bit different and also uses a different thrust bearing.

Need to make sure i get the correct clutch for the engine.
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 185
Joined: Mon May 05, 2008 3:54 pm
Location: Canberra, ACT, Australia

Post by SimonInAustralia »

The 1HZ Engine Repair Manual only shows an engine serial number as 'Identification Information'.

It is located on the left/rear of the engine, and it looks from the drawing that it is on the side of the block, somewhere around the dip stick.
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

cheers simon
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests