Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nissan Diff gears

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 16
Joined: Sat Jan 10, 2009 1:38 pm
Location: perth wa

nissan Diff gears

Post by 5middy »

This is a toyota owner venturing in to the unknown...

Am thinking of putting GU diff and GQ in to my winch challenge hilux single cab. Currently running Hilux 4.88 diff gears, and am wanting to know if i can keep the same diff ratios if i was to put a GU diff in the front and a GQ diff in the rear. What i need to know is what vehicle can I find either NISSAN 4.66 OR 4.88's to fit in to nissan diffs, and Is there any problem with running a nissan REAR diff in the front, but run it backwards? i.e teeth cut would be backwards?

Any thoughts / answers?
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

4.8 are rare and the 4.6 come in GQ GU 2.8td wagons. .

Make sure for what you are doing you use only genuine nissan diff gears.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Re: nissan Diff gears

Post by gu town »

5middy wrote:
and Is there any problem with running a nissan REAR diff in the front, but run it backwards? i.e teeth cut would be backwards?

Any thoughts / answers?
nissan rear diff pumpkin is in the center...
wont you have issues clearing your sump?
GU td42 ute with go fast bits and go futher bits
Top
Posts: 470
Joined: Wed Jan 24, 2007 12:21 pm
Location: Australia

Re: nissan Diff gears

Post by 351ciofgrunt »

gu town wrote:
5middy wrote:
and Is there any problem with running a nissan REAR diff in the front, but run it backwards? i.e teeth cut would be backwards?

Any thoughts / answers?
nissan rear diff pumpkin is in the center...
wont you have issues clearing your sump?
I think he means the diff centre, not the diff housing
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Yeah I am not sure what he means but I dont see any advantage in putting the raer in the front. The front GU is plenty strong enough no need to try and make it stronger. Maybe his tailshaft is on the passenger side and he needs to sort that out somehow.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 16
Joined: Sat Jan 10, 2009 1:38 pm
Location: perth wa

Post by 5middy »

my front drive shaft is on the drivers side, and rear tailshaft is also on the drivers side. Wont have any problems witht he rear diff pumpkin being in the centre as i have plenty or room to play with. What is was originally meaning was to put a GQ diff head in the front, in a GU diff, not the whole of the rear diff in the front..

thanks guys
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

5middy wrote:my front drive shaft is on the drivers side, and rear tailshaft is also on the drivers side. Wont have any problems witht he rear diff pumpkin being in the centre as i have plenty or room to play with. What is was originally meaning was to put a GQ diff head in the front, in a GU diff, not the whole of the rear diff in the front..

thanks guys
Any reason why and I do not know of any one that has been able to put a complete rear centre in the front. Axle splines are tottally different plus lots more.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

5middy wrote:my front drive shaft is on the drivers side, and rear tailshaft is also on the drivers side. Wont have any problems witht he rear diff pumpkin being in the centre as i have plenty or room to play with. What is was originally meaning was to put a GQ diff head in the front, in a GU diff, not the whole of the rear diff in the front..

thanks guys
front and rear diffs are different models.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Post by gu town »

rear into front= sh!t idea
GU td42 ute with go fast bits and go futher bits
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests