Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series Lift Height

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 68
Joined: Tue Jun 10, 2008 9:42 pm
Location: Warragul (sometimes)

80 series Lift Height

Post by troopa »

Have recently purchased a early GXL 80, it has had H/D susp put in the rear as the last fella used it solely as a work rig putting heaps of weight in the back. I want to raise the front to match as she's doing a severe nosedive at the mo, drama is previous owner doesnt know what lift is in the rear so i dont know how to match it in the front. Does any 1 know the standard ride height of a 80 on 31x15's?
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

measured from the spring follower cone inside the spring to the axel perch standard height is 45mm.

You'd be better off replacing the front and rear springs. HD springs in the back with no weight will ride crap and won't flex too well either.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Posts: 17
Joined: Sun Jun 28, 2009 1:43 pm
Location: Brisbane

Post by cyberblitz »

gud idea
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Post by howsie »

got a 5 inch lift in mine to give you an idea see the pic below but not sure how long ago it was put in. But if it didn't already have the kit i would have done it anyway flex's fairly well and handles better than a lifted hilux.

click pic below for bigger version, this is first week i brought it with standard 31" tyres on it

Image
Posts: 68
Joined: Tue Jun 10, 2008 9:42 pm
Location: Warragul (sometimes)

Post by troopa »

Took a punt and bought a set of 2 inch dobinsons springs and el cheapo long travel shocks which lifted the front 3inches and matches the rear perfect. Bolted a set of 35 bfg's on it and went bush out neerim east way on sunday along with a mates GQ and showed him up so i'm a pretty happy camper!!
Posts: 15
Joined: Mon Dec 21, 2009 7:45 pm
Location: Melb

Post by erik121 »

howsie how does your 80 handle with the 5" and 31's?
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Post by howsie »

this is my first 4wd but i was very surprised handle pretty well even a mate mark (markil on outers) has driven it and said it handles pretty well. I think a lot has to with the liift kit you run. Mines a toughdog lift kit with dobinsons springs and shocks. While dads got a 75 (howesy on outers) that standard height with EFS shocks and its terrible. Mines like driving a normal car compared to that.

ask either of the two before mentioned people and they could probably give you some more detailed info
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Post by howsie »

id offer to show you if i or you were closer
Posts: 99
Joined: Sat Feb 09, 2008 6:44 pm
Location: Blue Mountains NSW

Post by howesy »

howsie wrote:this is my first 4wd but i was very surprised handle pretty well even a mate mark (markil on outers) has driven it and said it handles pretty well. I think a lot has to with the liift kit you run. Mines a toughdog lift kit with dobinsons springs and shocks. While dads got a 75 (howesy on outers) that standard height with EFS shocks and its terrible. Mines like driving a normal car compared to that.

ask either of the two before mentioned people and they could probably give you some more detailed info
Terrible hey (lol) we are talking about a 75 here they're all terrible but those useless EFS rubbish big bore shocks dont help the biggest waste of $800 hard earned dollars I've ever spent definately wont look at any of their products again.
Posts: 15
Joined: Mon Dec 21, 2009 7:45 pm
Location: Melb

Post by erik121 »

ok cool, i was looking at getting a 4" coils and 30mm spacers. as i have 2" with 30mm spacers atm on 35 treps on my 80. goes well. only had scrub at extreme angles.
Posts: 20
Joined: Sun Jul 05, 2009 7:17 pm
Location: East Kurrajong

Post by YOGI001 »

Mate I am running a 4inch Snake extreme kit with 35 inch km2's and I am over the moon with them. It flexes almost as much as my mates 6 inch GU.

I woudn't go any higher than 5 inches as that will will still tuck 37's no probs.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests