Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

WHAT IS THE BEST SHOCK AVAILIBLE FOR AROUND THE $550 MARK

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

Re: shocks

Post by brendan rooke »

and you said your mate had a hell of alot longer than 4'' shocks on he's 60 correct?
well the guy at pro comp said they dont do longer than 4's for toyota vehicles(hilux and 60).i think it is you who doesnt know what hes on about.my mate has been working at pedders for 4 yrs and he rang pro comp and thats what they told him[/quote]

Do you think you have to run hilux shocks in a hilux and 60 shocks in a 60,

I have 80 series shocks in my 60 switched from front to rear.

My mates 60 did have Pro-comp shocks and they extended longer than standard 60 shocks+4 inch.

Off that topic, when your looking for shocks for your hilux, ask them whats the longest shocks they make...not whats the longest shock for a hilux.

You running custom mounts arent you?
_______________________________________

61 Series..12HT..SOA..37"claws.
Top
hi_luxmad
Banned
Posts: 194
Joined: Mon Mar 01, 2010 9:49 pm
Location: newcastle

Post by hi_luxmad »

simple misunderstanding.my bad

im running shock hoops and just changing the bottom mount locations.
hoping to get eye to eye shocks all round.
Top
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Re: shocks

Post by atari4x4 »

hi_luxmad wrote:i had 6'' over standard and bottomed them out
tried extending the bumpstops & was that with or without the 9" teal slackels?

nice thread hi-jack buttlux88 :roll:
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Top
hi_luxmad
Banned
Posts: 194
Joined: Mon Mar 01, 2010 9:49 pm
Location: newcastle

Post by hi_luxmad »

wrong wording on my part.
i topped them out like fully extended them.
therefore extending bumpsops wouldnt help
Top
Posts: 172
Joined: Tue Jun 16, 2009 3:34 pm
Location: Cairns, QLD

Post by FKT08 »

wrong wording on my part.
Wrong wording as in you used words and that was wrong. :fist: :fist:

If you haven't got any info on the subject at hand then STFU :bad-words: :bad-words:
[quote]* Ruff is ruthless, fear thee if ye has sh*tloads of stuppedy. [/quote]
Top
hi_luxmad
Banned
Posts: 194
Joined: Mon Mar 01, 2010 9:49 pm
Location: newcastle

Post by hi_luxmad »

take you kitten and POQ
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Re: shocks

Post by mike_nofx »

atari4x4 wrote:
hi_luxmad wrote:i had 6'' over standard and bottomed them out
tried extending the bumpstops & was that with or without the 9" teal slackels?

nice thread hi-jack buttlux88 :roll:
he's not using 9" slackels anymore. He's done a coil conversion so he can run dobinsons coils, purely for the colour

Image
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Oh! Best part is I actually purchased dobinsons teal coils from suspensionstuff and no shit, their location is SLACKS Creek!
Top
Posts: 33
Joined: Mon Dec 21, 2009 7:41 am
Location: goldcost

Post by matsgrit »

thanks for all the help i ended up callin 4wd1 in nsw talked to a bloke named kirk he recommened the tough dogs and i went with it. told him my measurements and he said i have a 7 inch lift in the end. now all i gotta do is fit em and do all my clearances, cheers fellas
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

matsgrit wrote:thanks for all the help i ended up callin 4wd1 in nsw talked to a bloke named kirk he recommened the tough dogs and i went with it. told him my measurements and he said i have a 7 inch lift in the end. now all i gotta do is fit em and do all my clearances, cheers fellas
ha another tough dog promotional thread!

tough dogs are the bomb mate, they will last you forever, they are the best, its well known fact eh.

hope they didnt cost you too little!
Top
Posts: 172
Joined: Tue Jun 16, 2009 3:34 pm
Location: Cairns, QLD

Post by FKT08 »

take you kitten and POQ
I can hear the golden gloves coming out :armsup: :lol: :lol:
hope they didnt cost you too little!
Not shitloads anyway :D
[quote]* Ruff is ruthless, fear thee if ye has sh*tloads of stuppedy. [/quote]
Top
Posts: 7
Joined: Sat Aug 21, 2004 8:18 pm

Post by danielbunt2 »

Love the konis, have to get them custom built for more than 4 inch lift i think?
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 86 guests