Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Another leak question
Moderator: Micka
Another leak question
Now I'm official confused ...
81 2 door auto. Got ATF leaking from somewhere, however it seems to be collecting on the transfer case? I haven't had a look inside, but I just want to make sure that I what I think is the transfer case is in fact the transfer case ...
View of what I think is the transfer box:
Plug on other side from above photo - I assume this is the filler/level plug for the transfer box?
I really hope the previous owner hasn't filled the transfer box with ATF ... but it shifts between ranges fine etc ... so who knows.
I'm currently removing the interior so will remove the interior panel so I can see it all from above ... sorry about the dumb questions, I'm still learning.
81 2 door auto. Got ATF leaking from somewhere, however it seems to be collecting on the transfer case? I haven't had a look inside, but I just want to make sure that I what I think is the transfer case is in fact the transfer case ...
View of what I think is the transfer box:
Plug on other side from above photo - I assume this is the filler/level plug for the transfer box?
I really hope the previous owner hasn't filled the transfer box with ATF ... but it shifts between ranges fine etc ... so who knows.
I'm currently removing the interior so will remove the interior panel so I can see it all from above ... sorry about the dumb questions, I'm still learning.
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Must be honest here, if it ain't pouring out, leave it alone. But change to oils all round of course.
I remember someone in the club satying to me years ago when I bought my first Rangie " oil leaks, unless you have a botomless pit of money, learn to put up with them!!!!". I still follow this philosophy, unles you haver the exxon valdeiz disaster under your Rangie
I have leaks under Aquarangier that have been there for the 3 1/2 years I have owned it. Example here is the front pulley seal, has always leaked since I have owned it. Hasn't gotten any worse, so I don't bother fixing it.
Just my thoughts. But good luck wiuth fixing the leaks. Hope you stop them.
Regards,
Trav
I remember someone in the club satying to me years ago when I bought my first Rangie " oil leaks, unless you have a botomless pit of money, learn to put up with them!!!!". I still follow this philosophy, unles you haver the exxon valdeiz disaster under your Rangie
I have leaks under Aquarangier that have been there for the 3 1/2 years I have owned it. Example here is the front pulley seal, has always leaked since I have owned it. Hasn't gotten any worse, so I don't bother fixing it.
Just my thoughts. But good luck wiuth fixing the leaks. Hope you stop them.
Regards,
Trav
Land Rover- The Collingwood of 4WD's!!!!
Trav,
I agree. I can put up with minor leaks like these. My old Pulsar leaked too ... it leaked under the cam cover, so I fixed that real good, then it leaked under the dizzy, so I fixed that, then it leaked from somewhere else ... so I just stopped trying to fix it.
The only reason I am chasing 'em is because I need to get a safety cert, so I'm trying to fix them. They're not big, but to a guy giving a safety cert, I'm sure they are
I agree. I can put up with minor leaks like these. My old Pulsar leaked too ... it leaked under the cam cover, so I fixed that real good, then it leaked under the dizzy, so I fixed that, then it leaked from somewhere else ... so I just stopped trying to fix it.
The only reason I am chasing 'em is because I need to get a safety cert, so I'm trying to fix them. They're not big, but to a guy giving a safety cert, I'm sure they are
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Thonger wrote:Depends on where they are leaking as well, they don't like oil leaking near the brakes or out of the transfer on to hand brake.
Brakes are okay, transfer is far enough away from the handbrake.
Anyway, I shall investigate. If its a cheap fix, no dramas.
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Okay, I get you now.. Didn't know that you were getting a RW!!
What I did when I bought my first 2 door was give the trans, engine and the like a good gerni and this was enough for us to get it passesd as there were no leaks visible under inspection (drove the Rangie straight there).
There were a couple of minor things like a tailight was not working and a cracked lens, but it passes with flying colours. The inspectors get picky about oil leaks, obviously don't understand britih engeneering!!!
Good luck with it all,
Trav
What I did when I bought my first 2 door was give the trans, engine and the like a good gerni and this was enough for us to get it passesd as there were no leaks visible under inspection (drove the Rangie straight there).
There were a couple of minor things like a tailight was not working and a cracked lens, but it passes with flying colours. The inspectors get picky about oil leaks, obviously don't understand britih engeneering!!!
Good luck with it all,
Trav
Land Rover- The Collingwood of 4WD's!!!!
Aquarangie wrote:Okay, I get you now.. Didn't know that you were getting a RW!!
What I did when I bought my first 2 door was give the trans, engine and the like a good gerni and this was enough for us to get it passesd as there were no leaks visible under inspection (drove the Rangie straight there).
There were a couple of minor things like a tailight was not working and a cracked lens, but it passes with flying colours. The inspectors get picky about oil leaks, obviously don't understand britih engeneering!!!
Good luck with it all,
Trav
Yeah, gotta get a RWC. I know of the trick regarding cleaning it immediately, and shall try that No big rush anyway, I can do a few things while its off the road - might as well rather than paying rego for it to sit in pieces in my back yard ...
Mine has a cracked lens too (rear pax side) that I am tracking down a replacement.
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
hate to be a bit of a bastard, but pity you didn't know me about 6 months ago. Still had some good lenses and could of sold to you cheap. Al;so had a few odds and ends for 2 door Rangies, but have bugger all now, just crap that ain't worth much
Should be able to pick one up cheap.
Good luck,
Trav
Should be able to pick one up cheap.
Good luck,
Trav
Land Rover- The Collingwood of 4WD's!!!!
Aquarangie wrote:hate to be a bit of a bastard, but pity you didn't know me about 6 months ago. Still had some good lenses and could of sold to you cheap. Al;so had a few odds and ends for 2 door Rangies, but have bugger all now, just crap that ain't worth much
Should be able to pick one up cheap.
Good luck,
Trav
Always the way hey! It's alright, I've been looking on and off and the 2dr was only a last minute decision anyway. Up till then I was looking at a late 80s one with all the tricks
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Who is online
Users browsing this forum: No registered users and 2 guests