Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NT ARB Air Locker into a WT Rear Diff

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 79
Joined: Tue Jul 18, 2006 7:27 pm
Location: NSW

NT ARB Air Locker into a WT Rear Diff

Post by JacZook »

Hi all

I have got my hands on a NT ARB air locker rear diff center and want to rip the locker out and install it into my WT rear diff. I have never done this before and pretty good with tools. I have a dial indicator but have never used it so I have no idea how to set it up to read the backlash of the diff before I rip it out. I know that I will have to change the ring from NT to WT ring but what else do I need or check?

Cheers
Top
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

Post by zookprojectfnq »

About 8 thou backlash and check it prints up ok. Also loctite and torque crownwheel bolts and loctite and toque bearing caps then hit the bolt heads with a copper hammer and toque again. You will need to heat the crownwheel to fit to the locker do not use the bolts to pull it on as it may crack it. use heat to get it off the NT locker and use a copper hammer. You dont need much heat a blow torch will suffice
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

zookprojectfnq wrote: You will need to heat the crownwheel to fit to the locker
no....you won't need to heat it up. a good copper head mallet does the trick for these little diffs just fine.

backlash set anywhere between 0.1mm to 0.2mm.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 79
Joined: Tue Jul 18, 2006 7:27 pm
Location: NSW

Post by JacZook »

Thanks guys

How do I use the dial indicator? Do I place it on the crown teeth and meausre the backlash?

Do I need any other tools or tricks?

cheers
Top
Posts: 1183
Joined: Tue Sep 22, 2009 10:24 pm
Location: In the Hills With a Riffle

diffs

Post by V.W.Dave »

wow your asking every one.... :)
Top
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

Do you want to swap it for a front air locker ?
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Top
Posts: 79
Joined: Tue Jul 18, 2006 7:27 pm
Location: NSW

Post by JacZook »

No thanks

cheers
Top
Posts: 18
Joined: Tue Mar 15, 2005 6:53 pm
Location: perth, wa

Post by angus350 »

same question but other way around. i can get a whole diff with air locker from a wt but i have a nt, would it be easier swapping out the whole diff or just swaping centers ?

cheers
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 24 guests