G'day all, New to the site and i realise you have probably talked about this before, but for a newby is there anybody out there that has successfully put a 1hdfte into an 80's 1hz. I am fairly mech handy so could do at home or is there any mob in the Eastern suburbs of Melbourne that could do this for me? My old 1hz has nearly given up the ghost and i would love to put a 100's TD in the front.
Are there any custom wiring harness mobs out there to do the electrics as i understand this is one of the trickiest things.
Any advice is welcome.
Cheers BBucket
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1hz to 1hdfte in an 80.
Moderators: toaddog, Elmo, DUDELUX
pm killalux on here he can help you out with the wiring
http://www.outerlimits4x4.com/ftopic206991.php
he does do the harness you are after pretty sure
http://www.outerlimits4x4.com/ftopic206991.php
he does do the harness you are after pretty sure
home brew cooling in progress
Thanks legend80, I am already having a chat with killalux via ebay. He seems to be the man!
Any hints on the mechanical side of things?
The bell housing, clutch area is a bit confusing. I am running a Daikin safari tuff clutch plate, everything else is stock. I am hoping the mech side of things is a straight swap. I might have to source a new mount for my endless air comp but everythong else seems cool or am i dreaming?
Any hints on the mechanical side of things?
The bell housing, clutch area is a bit confusing. I am running a Daikin safari tuff clutch plate, everything else is stock. I am hoping the mech side of things is a straight swap. I might have to source a new mount for my endless air comp but everythong else seems cool or am i dreaming?
Who is online
Users browsing this forum: No registered users and 0 guests