Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Metal Gaskets

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 49
Joined: Mon Mar 28, 2005 10:14 pm
Location: Canberra

Metal Gaskets

Post by Lowisuzu »

Hi All,
i am putting back together a 3L motor, and it has been many years since i rebuilt a motor,
Nowadays it seems that Metal gaskets are used for just about everything.

my question is, with these gaskets, do i need to use a gasket sealer like permatex or something on these, or does tightening down the bolts squeeze the gasket to form it?
eg, the thermostat requires one of these gaskets. (the metal gaskets have a slight corrugation or bump pressed into them around the sealing area)

in the gasket kit there is also one for the timing case (oil pump) and it is more like an older gasket but is really waxy, again, do i need any sealer on this?
Top
Posts: 49
Joined: Mon Mar 28, 2005 10:14 pm
Location: Canberra

Post by Lowisuzu »

Anyone Help a Brother out?
Top
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

hey mate, we usually make sure its bare metal, clean and flat and put some permatex on there. Always seems to work for us.
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Yep permatex or locktite 515
Wtb, 105 series rear tyre carrier, alloys and tyres.
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

If there is a bit of doubt loctite 5900
Wtb, 105 series rear tyre carrier, alloys and tyres.
Top
Posts: 71
Joined: Sat May 24, 2008 1:14 pm
Location: geelong, vic

Post by hurricane »

ive used a light smear of permatex or sprayed hylomar that is used for head gaskets with out any issuses
84 FJ60, SOA , 35's, 5ltr V8, Straight Gas. 80's coils in the making.
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

m

Post by Clanky »

I put all mine in as they came (dry) - no leaks - but I did use genuine gaskets
My engine has metal gaskets just about everywhere apart from sump and timing cover
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 34 guests