Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Those Front Hub Circlips
Moderator: Tiny
Those Front Hub Circlips
Tried to purchase a new pair of front hub circlips today, tried Bursons, Repco, CBC and stacks of others, no luck! Got brave & visited local Toyota-Daihatsu parts dept, guy said " They got 3 prs in Sydney & they will cost more than $20 each" maybe somebody knows a good source of such heavy duty circlips. Should cost maybe $2-$4 each possibly...
Have 2 Ferozas, keen vehicle modder, do most repairs myself, 62years young, got the Feroza Bug....
You mean the external circlip that retains the axle in the hub?
CBC sold me a pack of 20.... and if your changing them just because the manual says you need to - don't bother...... yes its not a bad idea but its not a high load part and if you don't butcher them to get them out ( i.e. use the correct tool ) are perfectly reusable.
All they do is stop the outer shaft pulling out of the freewheel hub inner and miss aligning the hub seal - important, but not worth changing every time.
I carry a few in my toolbox more to solve the "opps i've dropped it into a boghole" that would inevitably happen IF i ever broke a driveshaft on the tracks. As I carry spare outer and inner CV's that will probably now never happen
Don't stress.....
CBC sold me a pack of 20.... and if your changing them just because the manual says you need to - don't bother...... yes its not a bad idea but its not a high load part and if you don't butcher them to get them out ( i.e. use the correct tool ) are perfectly reusable.
All they do is stop the outer shaft pulling out of the freewheel hub inner and miss aligning the hub seal - important, but not worth changing every time.
I carry a few in my toolbox more to solve the "opps i've dropped it into a boghole" that would inevitably happen IF i ever broke a driveshaft on the tracks. As I carry spare outer and inner CV's that will probably now never happen
Don't stress.....
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Since you are going to by new circlips by the one with the two holes one them
and also a circlip tool that will make your life easier to fit or to take out your circlips.
and also a circlip tool that will make your life easier to fit or to take out your circlips.
www.ferozaclub.gr
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
Those Front Hub Circlips
Hi' ferozamaniac
Great news, I would really like to fit those circlips with the holes however I have not been able to find such a circlip that is thick enough to replace the Feroza one, many suppliers have suggested that I fit 2 of the thinner circlips with holes together so that they fill circlip groove, but I would prefer the thicker one piece style with holes as shown in your pictures, where can I purchase these thicker ones? They would be fantastic. regards from Ran
Great news, I would really like to fit those circlips with the holes however I have not been able to find such a circlip that is thick enough to replace the Feroza one, many suppliers have suggested that I fit 2 of the thinner circlips with holes together so that they fill circlip groove, but I would prefer the thicker one piece style with holes as shown in your pictures, where can I purchase these thicker ones? They would be fantastic. regards from Ran
Have 2 Ferozas, keen vehicle modder, do most repairs myself, 62years young, got the Feroza Bug....
As Ferozamaniac is in Greece...... i suspect his suppliers wont be much use to you 
But he right..... in fact i've always used this type of circlip ( actually forgot there were any other types...... )
I can't emphasize enough that these circlips carry NO LOAD - all they do is stop the outer CV slipping back. I've seen cars run with no circlips for ages without issues ( not that i'd do it by choice ).
Just fit the type as shown - a little slack between the clip and the groove will make absolutely no difference. The grooves actually vary between axles so its not a precission part.
But he right..... in fact i've always used this type of circlip ( actually forgot there were any other types...... )
I can't emphasize enough that these circlips carry NO LOAD - all they do is stop the outer CV slipping back. I've seen cars run with no circlips for ages without issues ( not that i'd do it by choice ).
Just fit the type as shown - a little slack between the clip and the groove will make absolutely no difference. The grooves actually vary between axles so its not a precission part.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Those Front Hub Circlips
Thanks MightyMouse, sounds like these Circlips are not so critical as Daihatsu would have us believe, definately prefer this style of external circlip, this forum provides a very special level of support, fantastic work, many thanks to everyone. Ran
Have 2 Ferozas, keen vehicle modder, do most repairs myself, 62years young, got the Feroza Bug....
Who is online
Users browsing this forum: No registered users and 2 guests