Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

coil drop out cone

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 71
Joined: Thu Jul 10, 2008 8:24 am
Location: brizzy

coil drop out cone

Post by jaybammm »

hey there i have a gq wagon with 5inch spings and over 30inch shocks with a-frame

just wondering if i can use the rubber bump stop out of the toyota 80 that i have 2 off allready and bolt it with a flat plate ontop of my coil towers and have the rubber bump stop hanging down as u would in the 80,

would this work like the superior boilt in coils drop out retainers , the point of this i want the coil to locate back to the position after poping out on full flex ......

cheerZ
Top
Posts: 378
Joined: Tue Nov 02, 2004 8:54 pm
Location: blue mountians

Post by superzuki »

yes you can use an 80 bump stop

I used mild steel pipe reducers (100 - 50mm i think). i got them from a steel fabrication shop they are about 100mm long and were about 25 or 30 each i think. measure the spring seat for the larger measurment
Top
Posts: 31
Joined: Tue May 13, 2008 1:35 am
Location: Towsnville

Post by Mattoz »

anyone got any pics of 80 series bump stops in a gq?
Top
Posts: 4
Joined: Sun Mar 15, 2009 10:48 am
Location: HALLAM

Post by Battletruckmat »

you can get the pipe reducers from any plumbing supplies.
they are about $30 a side and thick steel but you have to weld them in
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 65 guests