Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engineer or the PITS?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

engineer or the PITS?

Post by Middo »

hey iv got body lift, suspension lift, 33's, and a tube bar on my fourby. im just wondering is it easier to find a friendly engineer to have a look at my truck and get an engineers cert for it or to go to the DOT and fill out the modifications form and have them look at it to get it certified. cheers
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Unless things have changed recently, in Qld a body lift cannot be "certified" by an engineer. It must go over the pits.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

-Scott- wrote:Unless things have changed recently, in Qld a body lift cannot be "certified" by an engineer. It must go over the pits.

^^^
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

Which is why there are so many vehicles doing the rounds without the certificate. I'm pretty sure they will get sick of doing it and palm it off back to vehicle engineers again anyway. When done properly, it's not such a major modification.
Don't take life too seriously...it isn't permanent.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 168 guests