Whats the difference in drop between a 70 and 80 pitman arm? I've just completed my 60 PS conversion on my 40, and envisage a SOA conversion sometime.. I will need less drop than the 70 arm gives, is there anything to be gained by changing to 80 parts? If so, what?
I know there are flat pitman arms available, but these have a shorter centre to centre spacing of the tapered holes..
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Difference in drop between 70 and 80 pitman arm
Moderators: toaddog, Elmo, DUDELUX
I looked at the 80 pitman arm when I did my conversion couple weeks back. Visually couldn't see much difference in drop, not to mention the difficulty in a wreckers selling the arm without the box.
So i guess with a spring over you will use flatter springs and short shackles? Hence the need for clearance??? Maybe superior have a solution...
So i guess with a spring over you will use flatter springs and short shackles? Hence the need for clearance??? Maybe superior have a solution...
Thats the general idea with the SOA, flat springs.. I plan to use stock length shackles to keep it all low as possible.. This is why I need a flatter pitman arm..
Before people start suggesting that I use highsteer and a flat highsteer arm, I'm building this to a budget and will be using a cast double arm on the passenger side.. I need the pitman arm to match the length of that arm for best results..
Before people start suggesting that I use highsteer and a flat highsteer arm, I'm building this to a budget and will be using a cast double arm on the passenger side.. I need the pitman arm to match the length of that arm for best results..
maybe a hilux one will work? some of them look flater, not sure how the spline size is though?
ive got a 60 and 80 series power steering box hear the drop of the 2 arms is about the same, only 3mm different if that.
im after a arm that drops lower than a 80 series.
dan.
ive got a 60 and 80 series power steering box hear the drop of the 2 arms is about the same, only 3mm different if that.
im after a arm that drops lower than a 80 series.
dan.
84 FJ60, SOA , 35's, 5ltr V8, Straight Gas. 80's coils in the making.
Black Bull wrote:Hilux IFS should be the same size shaft as cruiser,
You can get flat ones from Locktup
IFS arms are the same taper, but are shorter.vk7ybi wrote:Before people start suggesting that I use highsteer and a flat highsteer arm, I'm building this to a budget and will be using a cast double arm on the passenger side.. I need the pitman arm to match the length of that arm for best results..
A shorter IFS arm would work properly with the shorter high steer arms..
Who is online
Users browsing this forum: No registered users and 11 guests