Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Driving without a CV

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Driving without a CV

Post by hokey »

hey guys,

i blew my cv up last night, short side. just pulled it out then and it's completely smashed. i think the axle broke.

anyway i need to get to work tomorrow and didn't have any luck sourcing one today and was wondering if i can drive without the cv in? the wheel bearing would all be locked onto the stub axle with the lock nuts so i can't see any problems with the wheel fallIng off. i could drain all the diff oil so that it won't piss out everywhere. anyting else i'm missing?

cheers
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

hey bro i got a 80 and ive been driving 4 a month without front drive i left the cv in disconnected front drive (constant fourby)
sealed the hub end with a rag to stop crap coming out and wollah.
if you got hubs just put ur hub back on should seal it up
chears mick
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

yeh got the hubs btu don't want diff oil to wash my bearings so figured i would just drainthe oil not constant 4wd so won't matter . i would drive with broken cv but i have no steering lock and is quite dangerous.
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

yeah doesnt worry me gonna redo whole front end.
i was gonna drain oil but mate told me not too?
dont know why??
Posts: 72
Joined: Sat Oct 04, 2008 12:26 pm
Location: over here

Post by TomSeth »

Your 80 is constant 4wd so the diff is still being driven, if you drain the oil out, the diff won't have any lubrication while its spinning. Patrols aren't constant so you could get away with draining oil and drving around if you had to, aslong as you didn't engaged 4wd or the hubs. Don't recommend it though.
Last edited by TomSeth on Sun May 02, 2010 7:14 pm, edited 1 time in total.
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

why is it being driven? hubs will obviously be unlock so no drive to diff at all.

so anyone know if i can drive without the cv?
Posts: 72
Joined: Sat Aug 05, 2006 7:52 pm
Location: Sunny Coast

Post by Josh085 »

hokey wrote:why is it being driven? hubs will obviously be unlock so no drive to diff at all.

so anyone know if i can drive without the cv?
Why dont u just take the front tail shaft off??
no drive than
Posts: 72
Joined: Sat Oct 04, 2008 12:26 pm
Location: over here

Post by TomSeth »

yes you can drive a patrol without cv's just pull the cv's out and reassemble it without the cv/axle in there.
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

thanks for the answer tom seth :)

josh: why wouldn't i just unlock the hubs? seems easier than removing taishaft?

anyway i think i've worked out a car i can borrow but handy info to know.

cheers
Posts: 72
Joined: Sat Oct 04, 2008 12:26 pm
Location: over here

Post by TomSeth »

No worries mate, good luck with it mate
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

I don't get why you should remove the prop shaft.

Unlock the passenger side hub and reassemble the drivers side without the CV/axle. It will be fine, providing you drain the oil so it doesn't spew out the open axle. I'd also be jamming a rag into the open axle end but that's just me.
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

TomSeth wrote:yes you can drive a patrol without cv's just pull the cv's out and reassemble it without the cv/axle in there.
x2
Don't take life too seriously...it isn't permanent.
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

hokey wrote:why is it being driven? hubs will obviously be unlock so no drive to diff at all.

so anyone know if i can drive without the cv?
sorry hokey i obviously confused people
cheers mick
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

oh yeah and just to clear sumpin up 4 you your hubs only engage ur wheels not ur diff.
when u select 4wd it engages your front driveshaft which spins ur diff.
cheers mick
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

yeh cheers i was quite aware of that. wasn't going to go 4wd'ing with it haha. if it was a constant 4wd i'd have to worry about it ;)
Posts: 18
Joined: Sat Jul 04, 2009 1:48 pm
Location: Gold Coast/ Melb

Post by boggertrol »

i had this issue not being able to source cv and just put it back together and drained the oil as the other guys said not a drama, drove it from brissy to melb, even via stockton beach, didn't do anything too fun but still drove on the beach haha
Cheers Jonny

GQ 38.5 boggers front air locker, 6 horse highmount, beadlocks, lots of battlescars.
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests