Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

99 hilux front diff :?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 9
Joined: Sun Mar 07, 2010 6:44 pm
Location: ipswich

99 hilux front diff :?

Post by boger »

hi guys i got a 1999 hilux with the ifs now on the driver side where the cv bolts onto the diff that is all loose and clunks when u are going over a bump
on the road what is this would this be just a bearing gone in the diff housing and what do i need to do to fix this.
i am allmost certain the front dif will have to come out but i want to make sure before i pull it out that there is
not something trivial that i might be missing, cheers



tim
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Check that the axle flange hasn't moved outward from the diff, here is a pic of how it should sit,

It is held in by a snap ring that engages once the axle is inserted far enough itno the diff.

Image
Posts: 9
Joined: Sun Mar 07, 2010 6:44 pm
Location: ipswich

Post by boger »

the problem is on the short side not the long side of the dif
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

boger wrote:the problem is on the short side not the long side of the dif
Yep, best pic I have, hopefully it demonstrates how far in the axle should be.

Cheers
Posts: 48
Joined: Sat Sep 12, 2009 8:27 am
Location: Mackay

Post by 80gus »

where the shaft goes in on the rhs Missing in this photo. the either run needle roller bearings or a bush the commonly wear ARB lockers have a removable bush. if there worn it may clunk.
Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests