i need to rebuild my current single transfer case and i am considering on buying one that i can rebuild at leisure out of the car and do swaps... then eventually using the orignial for the dual setup...
my question to you guys is: are the LN106 dual cab hilux transfer's the same as my 86 hilux (yn67) transfer? and could i use both for a dual setup?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Dual Transfers, hilux ... help
Moderators: toaddog, Elmo, DUDELUX
Dual Transfers, hilux ... help
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Yes, you'll either need a top shift case and a forward shift case or just convert one of the forward shifting case to top shift by cutting and rewelding the rails. Seen here:
http://www.pirate4x4.com/forum/showthre ... conversion
http://www.pirate4x4.com/forum/showthre ... conversion
shouldnt have to cut and reweld to convert a forward shift to a top shift...I converted my 07 transfercase from a forward shift to a top shift by getting the shoft rods out of an 03 V6 hilux transfercase which is a top shift and swapping them over......done.
surely you can find the correct length shift rods needed in another hilux thats compatible?
surely you can find the correct length shift rods needed in another hilux thats compatible?
[url]http://www.monsterrides.com.au[/url]
id probs end up buying the kit of lockedtup anywaysmmaaxx wrote:shouldnt have to cut and reweld to convert a forward shift to a top shift...I converted my 07 transfercase from a forward shift to a top shift by getting the shoft rods out of an 03 V6 hilux transfercase which is a top shift and swapping them over......done.
surely you can find the correct length shift rods needed in another hilux thats compatible?
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Who is online
Users browsing this forum: No registered users and 0 guests