Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

my companion flange is different on my new diff ?? HELP !!!!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 96
Joined: Fri Jan 01, 2010 10:34 pm
Location: nsw central coast

my companion flange is different on my new diff ?? HELP !!!!

Post by dazgq1 »

Hey there , i installed my gu rear diff with 4.6 centre today and the bloody flanges are different :bad-words: will they swap over easily enough ? if so can i just "witness" mark the locknut and shaft as i dont have a torque wrench to measure the (break loose torque) as stated in the manual THANKS IN ADVANCE ;)
cheers
daz
4 in king springs, pro comp long travels, gu diffs, 4.6s ,front lokka,35" mtzs, custom made everything ,custom dual cab and a growing list of spare parts
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

did you get the 4.6's from a 2.8? the pinnion flanges are interchangeable
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 96
Joined: Fri Jan 01, 2010 10:34 pm
Location: nsw central coast

Post by dazgq1 »

badger wrote:did you get the 4.6's from a 2.8? the pinnion flanges are interchangeable
great news thanks mate .What about the backlash and no torque wrench problem ? will witness marks be ok (alignment markings) and just do back up till it all lines up precisely ??
4 in king springs, pro comp long travels, gu diffs, 4.6s ,front lokka,35" mtzs, custom made everything ,custom dual cab and a growing list of spare parts
Top
Posts: 25
Joined: Sat Dec 26, 2009 11:57 pm
Location: brissy

Post by boost is good »

dazgq1 wrote: .What about the backlash and no torque wrench problem ? will witness marks be ok (alignment markings) and just do back up till it all lines up precisely ??
yep .. use a rattle gun if ya got 1 .. they get pretty tight sometimes
Top
Posts: 140
Joined: Sun May 18, 2008 4:24 pm
Location: bogged in a hole near you

Post by BeNoS »

they are a shim type preload setup so you can basically do em up as tight as you like and it wont affect it at all.
if you have a rattle gun just use speed 1 or 2 not full noise and you wont have a drama
Top
Posts: 96
Joined: Fri Jan 01, 2010 10:34 pm
Location: nsw central coast

Post by dazgq1 »

:armsup: thanks fellas im into it tomorrow soon as i find a 32 mm socket
(i think) somewhere round here in the shed :oops:
one day i might sort it all out ......................one day :lol:
4 in king springs, pro comp long travels, gu diffs, 4.6s ,front lokka,35" mtzs, custom made everything ,custom dual cab and a growing list of spare parts
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests