I need some help with hooking up front and rear maxi drives, i have a pile of bits i got second hand and not real sure how it all goes to geather, as in all the air hoses and wiring. If anyone has any instructions or pictures of their setup, that would be really great.
Cheers
steve.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Maxi drive lockers
Moderator: Micka
It is not hard.
There are 3 hoses and one wire. The wire sends -ve to the light.
For the 3 hoses, one is the breather, on is for activation, and one is for deactivation. Which is which depends on if you are using compressed air or vaccum.
If using compressed air, don't go above 20 psi.
There are 3 hoses and one wire. The wire sends -ve to the light.
For the 3 hoses, one is the breather, on is for activation, and one is for deactivation. Which is which depends on if you are using compressed air or vaccum.
If using compressed air, don't go above 20 psi.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Cool! So compressed air will work fine then for the actuators?ISUZUROVER wrote:It is not hard.
If using compressed air, don't go above 20 psi.
I have often thought about it over the past ten years on and off, and never have given it a go. Have been wanting to do it for ages.
Ive never liked the idea of vacuum since a line broke in the middle of a muddy creek and sucked in heaps of water and eventually the line blocked up with mud. Wasn't that an effort to clean out.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Realistically anthing that works off vacuum could be run off low pressure compressed air if you can hook it up backwards.... unfortunately the reverse isn't often true, since stuff that is designed to run on compressed air usually runs a decent amount of pressure!bushy555 wrote:Cool! So compressed air will work fine then for the actuators?ISUZUROVER wrote:It is not hard.
If using compressed air, don't go above 20 psi.
I have often thought about it over the past ten years on and off, and never have given it a go. Have been wanting to do it for ages.
Ive never liked the idea of vacuum since a line broke in the middle of a muddy creek and sucked in heaps of water and eventually the line blocked up with mud. Wasn't that an effort to clean out.
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Yep. I have been running mine on 15psi compressed air since new.bushy555 wrote:Cool! So compressed air will work fine then for the actuators?ISUZUROVER wrote:It is not hard.
If using compressed air, don't go above 20 psi.
I have often thought about it over the past ten years on and off, and never have given it a go. Have been wanting to do it for ages.
Ive never liked the idea of vacuum since a line broke in the middle of a muddy creek and sucked in heaps of water and eventually the line blocked up with mud. Wasn't that an effort to clean out.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Sweet - thanks for the info on that. Another little project to undertake...ISUZUROVER wrote: Yep. I have been running mine on 15psi compressed air since new.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Who is online
Users browsing this forum: No registered users and 28 guests