Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IS GQ TRANSFER CASE SAME FOR AUTO AND MANUAL.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 55
Joined: Wed May 21, 2008 6:13 pm
Location: LEONGATHA, VICTORIA

IS GQ TRANSFER CASE SAME FOR AUTO AND MANUAL.

Post by BLUE MQ »

As it says in title, need to know if auto transfer case and manual case are the same, will auto case bolt to manual g-box? if anyone could let me know it would be great.
Thanks Jeff.
Top
Posts: 135
Joined: Tue Nov 20, 2007 9:26 pm
Location: Maitland

Post by niss50 »

yes
Top
Posts: 135
Joined: Tue Nov 20, 2007 9:26 pm
Location: Maitland

Post by niss50 »

yes
Top
Posts: 252
Joined: Fri Sep 02, 2005 3:45 pm
Location: outside your window

Post by hiy6o »

yes providing its a 4.2 the 2.8 and 3L rb30 have different flanges and front plate that hold the seal has a lip round the seal which hits on the 4.2 box. ;)
Nup not telling
you'll have to find out yourself
Top
Posts: 55
Joined: Wed May 21, 2008 6:13 pm
Location: LEONGATHA, VICTORIA

IS GQ TRANSFER CASE SAME FOR AUTO AND MANUAL.

Post by BLUE MQ »

Thanks for the replys, yes they are both TB-42s.
Top
Posts: 103
Joined: Sat Dec 19, 2009 9:27 pm
Location: Ipswich

Post by tufftruckin »

I have a gq td42 manual and a gu tb45 auto in the shed and th transfers look different the selector is in a different spot
An ounce of precaution is better than a ton of cure!
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

n

Post by Clanky »

yep the manual shows two different selectors for the t/case, but doesnt say if its limited to the auto or manual or Gu to GQ.
I guess you just have to make sure you get the appropriate selector linkage that comes with the t/case. ( it is to do with the cotter pin going through the linkage into the t/case shift shaft itself. Some are on top and some are on bottom)
Top
Posts: 190
Joined: Wed May 21, 2008 3:55 pm
Location: Coffs Harbour, NSW

Post by PacMan »

The gear box and transfer case shifter are further back in the GU.
On the GU t/c is no linkage like on the GQ t/c.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest