Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Changing clutch plate n HJ75

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2
Joined: Mon May 17, 2010 5:29 pm
Location: Australia

Changing clutch plate n HJ75

Post by Andrew Pettengell »

Hi
I have a Toyota Landcruiser cab chassis ute HJ75 with 2H engine. I changed the orginal clutch at 160,000km now at 350,000 and plan to change shortly. The complication is that I am in Bangladesh - half way through a worldwide driving trip! Can anyone advise what parts should be changed along with the clutch plate? It cna be hard to get a straight answer here!

Thanks
Top
Posts: 51
Joined: Sun May 21, 2006 3:25 pm
Location: Ipswich

Post by buddah_04 »

clutch plate, pressure plate, throw out bearing, spigot bearing and get the flywheel machined.
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

And rear main (rear crank) seal if possible while the flywheel is off getting machined.
Top
Posts: 198
Joined: Tue Jul 29, 2008 1:15 pm
Location: Wide Bay

Post by Barno111 »

RAY185 wrote:And rear main (rear crank) seal if possible while the flywheel is off getting machined.
A good idea but not always the way to go! If the rear main is not leaking then do not touch it! There is always a possiblity the new seal will leak! So dont change it if you dont have too! And Buddah said everything!
1996 HZJ75RP, DTS turbo with 3inch exhaust, rear locker, MTZs, 2inch shackles, 2 inch custom packs!
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

What they said^^ if you don't trust the mechanic get them to do as little as is required! Consider replacig the clutch lever and pin too.

Have you got a blog or something going?
Tetanus rolling on 37's
Top
Posts: 2
Joined: Mon May 17, 2010 5:29 pm
Location: Australia

Post by Andrew Pettengell »

Cheers for the help everyone....
The clutch is working well now - just buying the parts in preparation - might be harder to do in Pakistan/ Iran where we head next as depending on the situation we might have to go thru v quick with police escort!

I've tracked down a clutch plate - just can't find a pressure plate or a kit. Does anyone know if the toyota kits(or on genuine are still available for this engine? the

Can't attach link here but our blog is www drivingoz2uk2 dot com
Thanks again ...
Top
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Post by popeyehj60 »

yes the toyota kits are still available
Top
Posts: 18
Joined: Tue Dec 15, 2009 5:27 pm
Location: Brisbane

Re: Changing clutch plate n HJ75

Post by the_king »

Andrew Pettengell wrote:Hi
I have a Toyota Landcruiser cab chassis ute HJ75 with 2H engine. I changed the orginal clutch at 160,000km now at 350,000 and plan to change shortly. The complication is that I am in Bangladesh - half way through a worldwide driving trip! Can anyone advise what parts should be changed along with the clutch plate? It cna be hard to get a straight answer here!

Thanks
And check the fork for wear/cracks, because you'll be really pissed when if goes 5000kms after changing the clutch in your freezing cold, tool-less, dark, missus infested, beerless shed.....not like i'd know though :roll:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 113 guests