Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Best Steel

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 10
Joined: Sun Aug 24, 2008 8:56 pm
Location: Brisbane

Best Steel

Post by bundymuff »

What would be the best steel the make a winch bar out of?
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

I would have thought that most are made from mild steel.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

just 250FMS. 3.0mm would be heaps! Just make a 5-6mm mild steel cradle for the winch, the build the bar over that with 3.0mm sheet
[url]www.twinstickoffroad.com[/url]
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

Gutless wrote:just 250FMS. 3.0mm would be heaps! Just make a 5-6mm mild steel cradle for the winch, the build the bar over that with 3.0mm sheet
realy?
i used 10mm and was hoping was strong enough!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 410
Joined: Sun Jun 29, 2008 11:30 pm
Location: Melbourne, Australia

Post by craz3d »

familybus wrote:
Gutless wrote:just 250FMS. 3.0mm would be heaps! Just make a 5-6mm mild steel cradle for the winch, the build the bar over that with 3.0mm sheet
realy?
i used 10mm and was hoping was strong enough!
lol thats not only going to be strong enough, that'll be masses of extra weight on the front end.
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

craz3d wrote:
familybus wrote:
Gutless wrote:just 250FMS. 3.0mm would be heaps! Just make a 5-6mm mild steel cradle for the winch, the build the bar over that with 3.0mm sheet
realy?
i used 10mm and was hoping was strong enough!
lol thats not only going to be strong enough, that'll be masses of extra weight on the front end.
only the box section is made from that and the rest is 40nb tube it didnt feel any heavier than my old GU ARB winch bar!
if anything it felt heaps lighter :?
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

i use xtra form steel 400

cheap and much stronger than mild steel


also 10mm for a bullbar is way over kill.

if you are using 250 grade mild steel, i'd suggest 5mm for the cradel and 40nb heavy wall for the wings.
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

My ARB bar is ~3 mm box section with extra reinforcing ~3 mm thick at the winch mount area.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 10
Joined: Sun Aug 24, 2008 8:56 pm
Location: Brisbane

Post by bundymuff »

thanks heaps guys:)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests