Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
97 Ln106 tailshaft grease
Moderators: toaddog, Elmo, DUDELUX
97 Ln106 tailshaft grease
I think my tailshaft needs greasing because i can hear a rotating squeak whilst driving and if i put in the clutch it stops.
Its coming from the rear of the vehicle and sounds too loud to be coming from the diff..
just wondering if anyone had any ideas?
and also what grease i should use?
thanks in advance. Josh
Its coming from the rear of the vehicle and sounds too loud to be coming from the diff..
just wondering if anyone had any ideas?
and also what grease i should use?
thanks in advance. Josh
mate not sure if it would be a uni considering it goes away when you put your foot on the clutch considering your tail shaft is still spinning. Is the noise still there when your not moving. It maybe a dry throw out bearing. if it is a flogged out uni it should have movemnt try lifting your shafts and looking for any movement.
Checking for play probably won't help. If it's a uni and sqeaking it'll mean it's seized on one of its axis. Take your driveshaft off and you'll find you can't move the yoke in one of the directions it's supposed to.
x2. They'll only squeak when the shaft is under load.no, most probably a uni, when they are loaded up they squeak..
'96 Lux - DD
'79 BJ40 - Project
'81 BJ42 - Got the bug
'79 BJ40 - Project
'81 BJ42 - Got the bug
You need to answer the above question...matty savo wrote:mate not sure if it would be a uni considering it goes away when you put your foot on the clutch considering your tail shaft is still spinning. Is the noise still there when your not moving. It maybe a dry throw out bearing. if it is a flogged out uni it should have movemnt try lifting your shafts and looking for any movement.
Otherwise the uni would still be making noise regardless of weather you put the clutch in / out...
...with the info... throw out bearing on the clutch is stuffed not the uni
Noises are hard to track when you are driving, they eco and can be misleading when guessing
EDIT:Any lithium based grease is fine, i use (and have done for many years) any bearing grease i can get from work... but i grease them ALOT.
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
thanks for all your help guys.
i dont think its the throw bearing as the sound is distinctly coming from the rear of the car and its quiet clearly heard as if it was on the outside of the vehicle not muffled by any housings etc..
so the plan is to have a look at the uni's in the tailshaft first and if that doesnt fix it go from there...
once again thanks for all your help.
josh.
i dont think its the throw bearing as the sound is distinctly coming from the rear of the car and its quiet clearly heard as if it was on the outside of the vehicle not muffled by any housings etc..
so the plan is to have a look at the uni's in the tailshaft first and if that doesnt fix it go from there...
once again thanks for all your help.
josh.
Who is online
Users browsing this forum: No registered users and 5 guests