Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 rear drum brakes

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 35
Joined: Mon Feb 20, 2006 8:02 pm
Location: Western Sydney.

60 rear drum brakes

Post by FJOE45 »

can some1 tell me which way the dust seals go and the mounting bolts for the backing plate, are nuts on the inside of the brakes or the axle tube side. thanks, joe.
I guess three diamonds is better than two feet.
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Post by Wozza244 »

The nuts on the outside (visible from the outside of the car) and im not sure i understand what you mean by the dust seals? As far as im aware it only fits one way.
Get out there!!
Top
Posts: 286
Joined: Mon Jul 25, 2005 8:06 pm
Location: N.Q.

Post by bigbrowndog »

cheers, this may help.
Image
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

Wozza244 wrote:The nuts on the outside (visible from the outside of the car) and im not sure i understand what you mean by the dust seals? As far as im aware it only fits one way.
the diagram bigbrowndog posted shows the opposite.

Its been a while since i had one open, but i vaguely remember the nuts on the inside of the assembly.
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Post by Wozza244 »

Shadow wrote:
Wozza244 wrote:The nuts on the outside (visible from the outside of the car) and im not sure i understand what you mean by the dust seals? As far as im aware it only fits one way.
the diagram bigbrowndog posted shows the opposite.

Its been a while since i had one open, but i vaguely remember the nuts on the inside of the assembly.
Seems its been a while and you cant read a diagram too :finger:

Because the bolts for the backing plate are clearly depicted in the diagram coming through from the inside, as i said, the nuts for the backing plate will be on the outside visible from the outside of the vehicle.

Cheers
Get out there!!
Top
Posts: 35
Joined: Mon Feb 20, 2006 8:02 pm
Location: Western Sydney.

Post by FJOE45 »

thanks for that fallas, what i call a dust seal the picture calls it an oil seal.
I guess three diamonds is better than two feet.
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Post by Wozza244 »

FJOE45 wrote:thanks for that fallas, what i call a dust seal the picture calls it an oil seal.
Not a worry mate, here to help where we can.
Get out there!!
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

Wozza244 wrote:
Shadow wrote:
Wozza244 wrote:The nuts on the outside (visible from the outside of the car) and im not sure i understand what you mean by the dust seals? As far as im aware it only fits one way.
the diagram bigbrowndog posted shows the opposite.

Its been a while since i had one open, but i vaguely remember the nuts on the inside of the assembly.
Seems its been a while and you cant read a diagram too :finger:

Because the bolts for the backing plate are clearly depicted in the diagram coming through from the inside, as i said, the nuts for the backing plate will be on the outside visible from the outside of the vehicle.

Cheers
hmm, i just confused what you meant. I was thinking more that inside = inside the brake drum.

my bad.
03 HDJ100R GXL / 94 FJ45-80
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests