Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sierra arb bar

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 143
Joined: Tue Oct 16, 2007 7:58 pm
Location: beaumaris - Victoria

sierra arb bar

Post by andy1517 »

Guys,
just purchased a arb bar for my swb 94 sierra.
I have a 2" body lift, and the bar has been modded for a 2" lift.
Does anyone have any pics of the mounting points?
94 zook, 2" body lift, 30.5" bfg muddies, custom bar, warn 8000, 240 XGT's, extractors and 2" exhaust.
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Ask dank ;)
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 191
Joined: Sat Jul 28, 2007 12:43 pm
Location: Vic

Post by 86slowsierra »

i dont understand this. sorry.
you want to know how to bolt your bullbar to your car?
[quote="v840"]Her:"Awww thats so sweet I love a man who is in touch with his blah blah blah"

You:"Giggidy."[/quote]
Top
Posts: 143
Joined: Tue Oct 16, 2007 7:58 pm
Location: beaumaris - Victoria

Post by andy1517 »

I want some pics of the actual mounting points. As mine have been hacked off, and therefore i need to mod some up and would like a starting point.
94 zook, 2" body lift, 30.5" bfg muddies, custom bar, warn 8000, 240 XGT's, extractors and 2" exhaust.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

so you have a 2" body lift and the bar has been modded for a 2" body lift so I still don't see why you have to adapt anything
Ransom note = demand + collage
Top
Posts: 143
Joined: Tue Oct 16, 2007 7:58 pm
Location: beaumaris - Victoria

Post by andy1517 »

because my mounts on my car have been modded.
Therefore I would like to return it to 'standard' when i fit the arb bar.
94 zook, 2" body lift, 30.5" bfg muddies, custom bar, warn 8000, 240 XGT's, extractors and 2" exhaust.
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

Hey Andy, the end of the sierra chassis is 50 x 100 box or something close. The mounts were 4 holes drilled into the end of the chassis rail about 10mm in from the end. two bolts on each side straight through. The mounts on the bar used to fit half inside the rail and half outside if I recall correctly. I used crush tube inside the rail to make sure I could tighten up the mounting bolts sufficiently and give it a bit of extra strength.

here's a pic of the standard mounting on the end of the chassis rail.

Image
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

andy1517 wrote:because my mounts on my car have been modded.
Therefore I would like to return it to 'standard' when i fit the arb bar.
so you want the bar to sit 2" lower than the body which is lifted?

I'm not being a troublemaker I just have no idea what you are trying to do. Your explanations just aren't making sense. Your mounts for what?
Ransom note = demand + collage
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

grimbo - he's saying the front of his chassis has been modified and the bar wont bolt up anymore as the original mounting points arent there - so he needs to restore his chassis to factory so it will bolt up.
The worst thing about censorship is ███████.
Top
Posts: 3
Joined: Wed Mar 03, 2010 4:46 pm
Location: Uki

Post by brindog »

He's saying the mounts on the chassis are not stock and he wants to put them back to stock so he can fit the bar.
Top
Posts: 191
Joined: Sat Jul 28, 2007 12:43 pm
Location: Vic

Post by 86slowsierra »

Image

there should be 2 holes for bolts at each circle.

i can take a better photo if needed, but its cold out and i dont want negative meat.

oh and the side 2 mounts are not all that important. but i have a feeling you know that already so im typing for no reason
[quote="v840"]Her:"Awww thats so sweet I love a man who is in touch with his blah blah blah"

You:"Giggidy."[/quote]
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

brindog wrote:He's saying the mounts on the chassis are not stock and he wants to put them back to stock so he can fit the bar.


right get it now or maybe be easier and safer to mod the bar if the chassis has been cut or modified as you don't want to keep modding the chassis as they aren't the strongest to begin with.
Ransom note = demand + collage
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

andy1517,

I think everyone now understands what the problem is. Can you post some photographs of your chassis before you modify it or the bar any more. It might be worth posting some pics of the back of the bar too.

Reason being - there's very little material to put back into the front of the chassis. The stock holes at the chassis end aren't strong enough for winching, which is why I recall Dank saying his bar was modified to add strength by picking up the front crossmember too.

The ARB can't be used for winching once the original bumper brackets have been removed, and these have always been removed to fit larger tyres.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 143
Joined: Tue Oct 16, 2007 7:58 pm
Location: beaumaris - Victoria

Post by andy1517 »

andy1517,

I think everyone now understands what the problem is. Can you post some photographs of your chassis before you modify it or the bar any more. It might be worth posting some pics of the back of the bar too.

Reason being - there's very little material to put back into the front of the chassis. The stock holes at the chassis end aren't strong enough for winching, which is why I recall Dank saying his bar was modified to add strength by picking up the front crossmember too.

The ARB can't be used for winching once the original bumper brackets have been removed, and these have always been removed to fit larger tyres.

Steve.
I will post pics soon.
I will organise to get some new points welded onto my chassis as I have a winch to put into it.
I will post some pics of the actual bar, as I am intrigued about these bumper brackets that are removed.

I will get this bar strengthened through using some brackets as outriggers.
Thanks guys
94 zook, 2" body lift, 30.5" bfg muddies, custom bar, warn 8000, 240 XGT's, extractors and 2" exhaust.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 83 guests