Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series ute engineered

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 277
Joined: Sat Nov 09, 2002 9:09 am
Location: Inverell

80 series ute engineered

Post by MADSHORT »

can some one who has done a chop and had it engineered let me know what the engineer is looking for to pass it
NSW
thanks in advance
cheers
Gordon[/img]
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Try calling the engineer you plan on using, he's the only one who's opinion counts on this matter.
Tetanus rolling on 37's
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Re: 80 series ute engineered

Post by familybus »

MADSHORT wrote:can some one who has done a chop and had it engineered let me know what the engineer is looking for to pass it
NSW
thanks in advance
cheers
Gordon[/img]
i will let you know how hard ass this dude is im using hopefully next week on my dual cab Mav! ;)
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 277
Joined: Sat Nov 09, 2002 9:09 am
Location: Inverell

cut

Post by MADSHORT »

thanks keep me posted will be appreciated
chopped my brothers 80 last weekend he was the one that rolled at willow glen couple years ago
took a couple of days
but all sweet
cheers
Gordon
Top
Posts: 277
Joined: Sat Nov 09, 2002 9:09 am
Location: Inverell

ute

Post by MADSHORT »

family bus how did ya go
cheers
Gordon
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Re: ute

Post by familybus »

MADSHORT wrote:family bus how did ya go
cheers
Gordon
goin to mod the rear mudflaps as im not happy with them and they are illegal and get it done tomorrow hopefully!
will post up the result (hopefully a good one!) ;)
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 267
Joined: Fri Nov 05, 2004 6:42 pm
Location: central coast nsw

Post by dirty harry »

g'day Gordon, long time no see, how you been ?
i rember that roll at willowglen ( how much for the rear bar).
my mate has been talking to Athol mullens 0414 685537
he's up here at cardif, along way from you.
he wants lots of pic's of the build.
and he said easy.
Top
Posts: 277
Joined: Sat Nov 09, 2002 9:09 am
Location: Inverell

Re: 80 series ute engineered

Post by MADSHORT »

hey harry that bar now resides on my vx
cheers Gordon
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Re: 80 series ute engineered

Post by Wozza244 »

x2 For Athol Mullen, he did mine recently hes very good no complaints at all from me.
Get out there!!
Top
Posts: 399
Joined: Sat Oct 31, 2009 9:16 pm
Location: Nth Richmond. NSW

Re: 80 series ute engineered

Post by Black Bull »

Basically, as long as your lift/tyres are within reason, rear tail lights on the tray meet ADR's and the cab is suitably braced where it's chopped and body mounts arn't affected, then you should be fine mate.

Mine's not done yet but has had one inspection already. ;)
Top
Posts: 6974
Joined: Fri Nov 14, 2003 3:14 pm
Location: Wollongong

Re: 80 series ute engineered

Post by ferog »

I found all of the engineers we looked at to have different expectations. It is worth while to ring around first, steer clear of the dodgy ones who'll pass anything as it may come back and bite you.

The man I used was reputable but also realistic (except for wanting truck brush in the arches :shock: )....... and try get one local so if you do have a problem you don't have to drive half a day to get there.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests