Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
"Why can't I turn left?"
Moderator: Micka
"Why can't I turn left?"
Trashed the steering damper on a mate's 95 Disco last week, after tweaking a log. Is there any way of relocating the damn thing so it isn't hte lowest point on the vehicle?
Yes, there is a way, and it envolves replicating the Defender location...
You will be needing:
1. A rear Defender trail arm (the one that was holding the Disco damper)
2. A relocation kit to slap the damper back up front
3. A new damper, or a kit that can adapt to the existing Disco one (although the "front" dampers should have at least one "eye" mount so as to make up for the added movements...)
THe relocation kit you can do by yourself with some metal work and so forth...
Goodluck
You will be needing:
1. A rear Defender trail arm (the one that was holding the Disco damper)
2. A relocation kit to slap the damper back up front
3. A new damper, or a kit that can adapt to the existing Disco one (although the "front" dampers should have at least one "eye" mount so as to make up for the added movements...)
THe relocation kit you can do by yourself with some metal work and so forth...
Goodluck
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Ruff,
Are you talking about something like the Southdown guard? I have not tried it, but I heard a LOT of negatives about (a) how low it hangs, (b) how heavy vs. weak it is, and (c) they pack mud and act like a Pull-Pal.
I would prefer using better rods and so forth, and relocating the damper, why add something that may cause a liability, right? Instead, fix what is at the root of the problem...
Sorry that I am sounding like a lecturer... :evil:
Are you talking about something like the Southdown guard? I have not tried it, but I heard a LOT of negatives about (a) how low it hangs, (b) how heavy vs. weak it is, and (c) they pack mud and act like a Pull-Pal.
I would prefer using better rods and so forth, and relocating the damper, why add something that may cause a liability, right? Instead, fix what is at the root of the problem...
Sorry that I am sounding like a lecturer... :evil:
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Don't confuse the Southdown Steering Guard and the Southdown Axle Guard. The steering guard is a damn fine thing, protects the steering rod and acts like a ramp when climbing obstacles.
http://home.off-road.com/~landy/steering.htm
The Axle guard hangs below the axle and looks like it would get in the way a lot.
http://www.dingocroft.co.uk/Accs&Equip/SDS3-02.htm
On a Disco, you will need to relocate the steering damper - beats me why they make position the damper where it's going to get hit. Lots of people make these - including Rockware
http://www.rockware.net/rover/
http://home.off-road.com/~landy/steering.htm
The Axle guard hangs below the axle and looks like it would get in the way a lot.
http://www.dingocroft.co.uk/Accs&Equip/SDS3-02.htm
On a Disco, you will need to relocate the steering damper - beats me why they make position the damper where it's going to get hit. Lots of people make these - including Rockware
http://www.rockware.net/rover/
ct
Lowbox,
What you are saying is probably true, however, I would prefer to modify the links, relocate the stabilizer, and "know" where everything is in order not to get them scraping on things...
Just my honnest opinion...
What you are saying is probably true, however, I would prefer to modify the links, relocate the stabilizer, and "know" where everything is in order not to get them scraping on things...
Just my honnest opinion...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Who is online
Users browsing this forum: No registered users and 2 guests