Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU LS2 Diff Ratio Selection
GU LS2 Diff Ratio Selection
Hi all.
Got a 6l LS2 going into a GU manual and it currently has 4.6 diffs. Im thinking the gearing will be too low. Will be running a combination of 33's and 35's.
Anyone recommend a good starting point for diff ratios ? 4.3's 4.1's ?
Cheers
Got a 6l LS2 going into a GU manual and it currently has 4.6 diffs. Im thinking the gearing will be too low. Will be running a combination of 33's and 35's.
Anyone recommend a good starting point for diff ratios ? 4.3's 4.1's ?
Cheers
I run 35's and 4.1's with an ls1 . Its was perfect when it was a N/A engine and its still perfect with forced induction on it. Just go with the 4.1's and if your going to use 37's go for the 4.3's or 4.6's.
Cheers
Gouldy
Cheers
Gouldy
GQ. Supercharged LSX 427, 500rwkw. camtech cam,90mm Holley Throttle Body. twin 4"exhaust, big fuel system, King bypass shocks and bumpstops.
I think you will find the ls2 will have much more torque then a td42t at 1800rpm if you have a look at the power curvesHoltrol wrote:With 35s & 4.11s you will be on about 1800rpm at 100k’s. I think that’s too low for a heavy truck. It might have more grunt than your diesel but not at 1800rpm. 2200 to 2500rpm at 100k’s would be good, the v8s like to rev.
Who is online
Users browsing this forum: No registered users and 131 guests