Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Death wobbles on 80series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

Simex Centipedes certainly aren't that old, neither are Mudzillas. There are plenty of other rag tyres out there. They still make them because they conform better off road thus providing more traction. The down side is, is when on road the tread trends to roll off itself on corners where a steel belted radial will keep the tread flat on the road.

Though a different application, Drag racers use a Bias belted tyres on the front to take out the positiveness of the steering when running slicks.
Don't take life too seriously...it isn't permanent.
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

death wobble

Post by brendan rooke »

I dunno about anyone else's experience with death wobbles were but i had a shocker today.

I just came through a roundabout and was excellerating...probably doing 30-35 ks, i hit a rough patch in the road and away she went....got this massive wobble in the front end, i thought i was loosing both front wheels it was that bad.

I had to come to a complete stop in my lane in traffic and then start again.

The look on the old girls face that was trying to pull out of the a drive way i was passing was priceless, i couldnt imagine what was going through her head when she seen this thing coming towards here with the front wheels going everywhere except straight.

Anyways, got home slowely...jacked it up, checked everything.

Wheel bearings could have an eighth turn maybe, tierods are fine, brand new efs extreme dampner, brand new springs, bushes, shackles, tyres just refitted to 10" rims and balanced.

I jacked the wheels off the ground and grabbed the wheel the same way you would to check tierods and i shock the shit out of it and fark me....

Whats the go with that????
_______________________________________

61 Series..12HT..SOA..37"claws.
Posts: 804
Joined: Thu Aug 07, 2008 9:44 am
Location: Perth

Post by pinkfloyddsotm »

Mounting my steering damper like this fixed my death wobbles for life!, id done so much trying to fix DW but once i welded a bracket on the diff and mounted back to the tie rod ,no more DW, i know it only masks the true problem but id seriously done almost everything i could and id still get DW.
Image
Posts: 14
Joined: Fri Nov 24, 2006 1:07 pm
Location: WA

Post by cruiserjb »

try doing a high steer, lift panhards to suit the lift as well
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

pinkfloyddsotm wrote:DW, i know it only masks the true problem but id seriously done almost everything i could and id still get DW.
well not quite. shimmys are inherent in any suspension design, and not always a sign of warn parts. they seem to be much more common in solid axle setups though. Most vehicles come from the factory with at least one steering damper for that reason.

once you start lifting and running bigger tyres it only exaggerates the problem. I like your setup. I guess there is less leverage on the damper this way, thus an improved road feel.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Post Reply

Who is online

Users browsing this forum: No registered users and 155 guests