Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Garrett T04B8 for 4.2?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 160
Joined: Tue Apr 11, 2006 11:45 am
Location: Sydney

Garrett T04B8 for 4.2?

Post by Buckshot »

After pulling out some marine diesels at work I might be able to get one of the turbo's off em cheap.
After some help in the Nissan tech section I have found out they are Garrett T04B88's.

Would this turbo be ok for a 4.2 diesel motor or are they too big. Inlet housing on one is AR60 the other is AR70. Motors put out 77kw. Not sure of the capacity but they don't look much bigger than the Patrol's motor.

Any help appreciated.
So Many Cats,So few Recipies
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

What's the capacity and speed of the motor it's off?
Top
Posts: 160
Joined: Tue Apr 11, 2006 11:45 am
Location: Sydney

Post by Buckshot »

KiwiBacon wrote:What's the capacity and speed of the motor it's off?
capacity of donor motor is 5.9 litre. Not sure about speed.
So Many Cats,So few Recipies
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

Buckshot wrote:
KiwiBacon wrote:What's the capacity and speed of the motor it's off?
capacity of donor motor is 5.9 litre. Not sure about speed.
How about an engine model?
A 5.9 should do 77kw easy without a turbo. Some marine 5.9's do 235kw.
Top
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

Not sure if its exactly the same but my mate was running a to4b diesel turbo on his toyota supra race car. 3 litre petrol engine that revs to 10000 rpm running 20psi and it didnt spool till about 4 grand. he switched to a to4z ball bearing for a quicker spool. I think it would be a bit laggy on a diesel but good if you want really good top end power.
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests