Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fj 40 power steering into hj47

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 118
Joined: Sun May 03, 2009 7:27 pm
Location: FNQ

fj 40 power steering into hj47

Post by Mulcahy »

hi i have been given a power steering pump and box off a petrol cruiser but i have been told that i will have to cut my steering shalft buy 25mm is it possible to get my steering shalft resplined, or is there a shorter steering shalft readily available

thanks Shane Mulcahy
Top
Posts: 107
Joined: Tue Sep 09, 2008 10:14 pm
Location: THE SHIRE:BIRTH PLACE OF MODERN AUSTRALIA

Post by AUSDOG »

Yeah you can get your steering shaft resplined. I got mine done at a gear makers down here in Sydney for my 40 series. Think it cost me 80 or 100...
ENGINEERED BJ42 3BT 37 CLAWS SPRUNGOVER 60S DIFFS POWERSTEER FLAT SPRINGS EXT SHACKLES ONE LOKKA IN THE FRONT ANOTHER ONE IN THE GARAGE...
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

get the steering shaft from the 40 there getting the rest of the bits from

the shaft isn't splined on the end there's a flange that bolts to the rubber flexi coupling
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 115 guests