Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MAXI TRAC (Ironman) suspension

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

MAXI TRAC (Ironman) suspension

Post by Jonezy01 »

Looking at puting some raised leaves in the back of my ute and was wondering what peoples thoughs and experience are?

From what ive been told maxi trac is just a sub brand of ironman, was quoted $300 a pair as against ironmans $400 a pair.

Also weather to go comfort or performance leaves? its for a 92 single cab triton alloy tray. Cary a load maybe once a month (Timber).

Cheers Jonezy
Posts: 68
Joined: Thu May 21, 2009 8:27 pm
Location: tassie

Post by brissle »

I put ironman in my old hilux and after 12 months the shocks went in the bin , 3 out of 4 were stuffed and I gave my springs away .This was from limited 4wding and basically no load carrying. Fitted OME spings and shocks , what a difference, never ever going to think about an ironman setup again absolute crap in my opinion.
Posts: 1419
Joined: Mon Apr 24, 2006 7:31 pm
Location: South Bris

Post by micks troll »

brissle sorry to hear you bad run but a mate has been running Iron man for a couple of years now in his Jackaroo and flogs it along the beach etc and has had no faults at all, hence i have since put in my patrol (2" springs and foam cell shocks) and i also have had no trouble. Only thing i notice is there coils are alot firmer than Kings i had previously in my old troll so would advise comfort springs as i went the next ones up (perfomance?)

I know these are both coiled vechicles (well Jackaroo rear) but we both are running the Ironman shocks with out failures. Dan is running the cheaper gas charged shocks and i'm running the slightly dearer foam cell!
Happy so far :cool:
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

YOU GET WHAT YOU PAY FOR , if it is cheap it is usually for a reason,commonly because it is chinese or indian.

I am not bagging any specific name or brand :lol:
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

had max trac shocks in my old lux(repco brand)
when i put my 2" springs in they didnt even make it between the pins in the rear and i checked the part nos and they WERE the ones to suit 2"lift.
after that i checked the fronts and after less than 500ks on highway they were both shot.... never again....
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Post by SCANAS »

A mate had ironman lift in his 75 it looked like it was held up by two toothpicks the shockies were rubbish, springs seemed to be ok for his use. If you want a good all round package search some more.
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

the springs that i had were iron man i believe.(see other post re shocks)
they were great but bought them quite a few years ago they were good for what i wanted at the time and are still going but the were the heavy ones so they didnt flex much.
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Post by Jonezy01 »

SuperiorEngineering wrote:YOU GET WHAT YOU PAY FOR , if it is cheap it is usually for a reason,commonly because it is chinese or indian.

I am not bagging any specific name or brand :lol:
I here what your saying, but if they got a 2 year/40thou warranty they got to have some faith in their product, dont they?

Im not planning on keeping the veichle long term(12 months max) which is why I dont want to spend the $$$ on a better brand, in saying that though I dont want to be throughing my money away on cheap sh!t either.

Jonezy
Posts: 68
Joined: Thu May 21, 2009 8:27 pm
Location: tassie

Post by brissle »

last time I heard the OME setup was only a couple a hundred more than ironman for a full set of springs and shocks for a lux . I'd rather put these in once than than frig around pullin them in and out for warrantty. must be other brands out there that are in the ball park price EFS?
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Post by Wozza244 »

SuperiorEngineering wrote:YOU GET WHAT YOU PAY FOR , if it is cheap it is usually for a reason,commonly because it is chinese or indian.

I am not bagging any specific name or brand :lol:
Which is why i use your products, tried, tested, and they work :armsup: :armsup: :armsup:
Get out there!!
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

micks troll wrote:brissle sorry to hear you bad run but a mate has been running Iron man for a couple of years now in his Jackaroo and flogs it along the beach etc and has had no faults at all, hence i have since put in my patrol (2" springs and foam cell shocks) and i also have had no trouble. Only thing i notice is there coils are alot firmer than Kings i had previously in my old troll so would advise comfort springs as i went the next ones up (perfomance?)

I know these are both coiled vechicles (well Jackaroo rear) but we both are running the Ironman shocks with out failures. Dan is running the cheaper gas charged shocks and i'm running the slightly dearer foam cell!
Happy so far :cool:

Foam cell shocks arn't made for aussie conditions.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

brissle wrote:I put ironman in my old hilux and after 12 months the shocks went in the bin , 3 out of 4 were stuffed and I gave my springs away .This was from limited 4wding and basically no load carrying. Fitted OME spings and shocks , what a difference, never ever going to think about an ironman setup again absolute crap in my opinion.
I am not promtoing nor bagging any brands either, But i do know that Ironman has made some good steps forward in recent years with there product developement. You may not have had the current generation product.
It is true that price usually reflects quality.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 441
Joined: Sun Nov 07, 2004 2:25 pm
Location: Rockhampton

Post by hj 45 »

EFS come in only marginally dearer than the equivalent Ironman suspension kits. I know which I'd rather buy...
Posts: 470
Joined: Wed Jan 24, 2007 12:21 pm
Location: Australia

Post by 351ciofgrunt »

hj 45 wrote:EFS come in only marginally dearer than the equivalent Ironman suspension kits. I know which I'd rather buy...
Yeah I'd also rather buy Ironman :finger:

I've got their 4inch springs & shocks in my comp truck and they've copped a hiding, still going good.

Image
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Shop around a bit more mate, you should be able to get some EFS or Dobinsons springs for not much more.
Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests