Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TD42T lift pump location

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

TD42T lift pump location

Post by Clanky »

I have a Walbro FRD11 lift pump ready to fit the GQ TD42T. Its mostly a touring truck so reliability is preferred over performance.
Where is the best place to fit it - engine bay or near fuel tank?

I have seen pics where peoples have fitted them near the tank, but have been wondering if it might be less prone to damage mounted under the bonnet before the filter.

What is the preferred option?

cheers
Top
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Contact:
Contact MyGQ

Post by MyGQ »

install it on the fuel line coming into the fuel filter. this also helps when you swap out fuel filters as you don't need to use the hand pump, you can just turn the ignition on and let the lift pump do the work for you
AA's for Quitters
Top
Posts: 345
Joined: Wed Dec 24, 2008 11:58 am
Location: Mackay

Post by tye1986 »

i put mine at the back ontop of the fuel tank much of the muchness really they can be noisy.
gq coil cab with stuff
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Most of the lift pumps are supposed to be close to the tank. If you fit it above the chasis rail it should be fine.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 276
Joined: Sat Jul 16, 2005 1:41 pm
Location: Melton, VIC

Post by eighty8 »

I run the same walbro pump. I mounted it at the back of the chassis next to the fuel tank on top of the 45 degree corner chassis piece.
In that position it is close to the tank and i didn't have to cut any steel lines, just got 2x 90deg brass fittings from pirtek or the likes and some 10mm hose etc.
Thats on a GQ wagon.

cheers.
[url=http://www.patrol4x4.com/forum/showthread.php?t=27334]The Weekend Warrior[/url]
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

Legends
Thanks for the replies - will look into it on the weekend

cheers
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 73 guests