Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
stage 1, got the turbo
Moderators: toaddog, Elmo, DUDELUX
stage 1, got the turbo
well the turbo has arrived[gt2876r], now for the fun part didnt think it would be quite so HUGE!!!!
4x4
still wont beat the nissan mick;;;; ha ha;;;;dazza
Re: stage 1, got the turbo
it is a thing of exquisite beauty!!!!
Re: stage 1, got the turbo
next to do take of sump and hammer out dent from hidden stump,install oil return ,fit adaptor to oil pressure switch and run line!!
Re: stage 1, got the turbo
oil fittings in sump ,sumps on, oil in, oil feed is teed off and working, rest now have lunch, take off exhaust manifold sarvo and bolt on exh an turbo hook up oil line and pipes should test drive tomorrow,hopefully??
Re: stage 1, got the turbo
Keep the reports coming...
Re: stage 1, got the turbo
hit a snag exhaust nuts bit tight soaking in inox overnight try again tomorrow
Re: stage 1, got the turbo
Curious to why your taking the exhaust manifold off, or do you mean the exhaust from the from the exhaust manifold. As I don't think you have any need to remove the exhaust manifold it's self?
Let's have some pics too
Let's have some pics too
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Re: stage 1, got the turbo
bought another one so i could bolt it all together before putting it in the car!!didnt need to just did actally now sitting on the studs ready to tighten up
Re: stage 1, got the turbo
how did you go with the wastegate actuator did you have to modify the mount to get it to fit or not
home brew cooling in progress
Re: stage 1, got the turbo
had to make new bracket and lenghten the throw on the actuator,but its all bolted in now ill run some pipers this week ,have to mod the heater water return pipe as it looks like it will be in the way of the exhaust
Re: stage 1, got the turbo
the steel part of my heater pipe misses by about 10mm. But im running a different manifold and an adapter plate too.
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: stage 1, got the turbo
im just gonna have t trim mine alittle
Re: stage 1, got the turbo
moved the water line pipe, ran water lines hooked up oil lines just waiting on silicone bends ,exhaust on friday [3"with muffler or without???any suggestions????]should be going next weekend
Re: stage 1, got the turbo
GT2876r + no muffler = LOUD!
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: stage 1, got the turbo
muffler for sure, unless you like being looked at everywhere you go.
I fitted a 3" system to my factory turbo 80 and it was way too noisey with no muffler, sounded like a school bus with a broken manifold.
go the longest straight through muffler you can fit in. It will still sound beefy, but will take some of the noise out without affecting flow
I fitted a 3" system to my factory turbo 80 and it was way too noisey with no muffler, sounded like a school bus with a broken manifold.
go the longest straight through muffler you can fit in. It will still sound beefy, but will take some of the noise out without affecting flow
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: stage 1, got the turbo
ok 3" with muffler ,ordered egt and boost gauges sunday with pillar pod
Re: stage 1, got the turbo
bieg troopy could u post some pictures of your setup please
Who is online
Users browsing this forum: No registered users and 7 guests