Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Roll cage into single cab GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Roll cage into single cab GQ

Post by WelchyGQ »

Is it possible to do this and still get the seat all the way back in the cab??

Pics would be awsome .

Cheers,

Welchy

5.6 RECOMMENDED DESIGNS
5.6.1 CAB CHASSIS VEHICLES
Due to space considerations in the cabin of cab chassis vehicles either a flexible joint shall be
used through rear of cab bulkhead or two separate roll cages shall be constructed.
The main rollbar in the cabin shall be within 150mm of the occupants’ heads but shall not
overhang the occupants. If there is insufficient room within the cabin the two diagonal cross braces
may be within the main roll bar to the rear of the cab.


Does this mean that if i have a cross brace on the tray and that brace si within 150mm of my heaad i dont need a brace in the cab at all?
Last edited by WelchyGQ on Sun Jun 20, 2010 8:38 pm, edited 1 time in total.
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 270
Joined: Tue Jul 08, 2008 4:47 pm
Location: Burpengary.... Where the hell is that?

Post by Red Dog 4x4 »

You could do it like this one -

Image

Notice the rear hoop be hind the cab.

Image
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

cage

Post by WelchyGQ »

yeah have looked at doing this. would prefer to keep the tray i have but. just curious if anyone has done it will the cage inside and still get the seat all the way back
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 8
Joined: Tue Sep 05, 2006 7:06 pm
Location: Townsville

Post by needalift »

its tight and if you go a race style of seat there aint much room... depends how tall you are... im 186cm tall and just did a trip up the cape in a mates gq ute with an internal cage... its bearable...

would you rather be squashed in a rollover???

And the above cage looks good... dont know how waterproof it would be though...
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

if you follow the CCDA guidelines, you are allowed to have just a roll hoop with a taxi bar across at shoulder height. The down side is that you have to have a full braced hoop as part of your tray.

If it's not for comps, why not install the hoops without the cross bracing and just install a horizontal brace a bit above the floor and the taxi bar at shoulder height. If you're still worried about the strength, either make it out really thick wall tube or run two hoops.

Brace yourselves for a really bad sketch

Image

Crappy drawing but you get the idea. You should be able to fit the seats in but the taxi rail will have to be bent to follow the profile of the rear wall.
Beaut Utes and 4x4's - Driving your dollar further off road

Call Matt - 0411 563 300

[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

cage

Post by WelchyGQ »

yeah it is for comps. I have thought about the taxi bar style. The only thing is not all the comps over here in WA are CCDA. some are CAMMS.

I already have a CCDA spec "half cage" as part of my tray
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

does your half cage have cross bracing in the main roll hoop?

If it does, then you don't need it in the internal cage as well.

see here
http://www.ccda4wd.com.au/images/Rollov ... 060428.pdf

pages 3 and 4 show the ute cage specs and as long as your vehicle is a dual cab or smaller (which it obviously is) then the cross bracing can be in the tray roll hoop. I'm pretty sure that CCDA and CAMMS have very similar specs. As long as the material is right and anchored properly you shouldn't have any dramas.

Feel free to correct me on the CAMMS aspect as I've not had much to do with it but the design principals of a good roll cage are pretty straight forward.

Here is a tray I made recently incorporating the bracing in the main roll hoop so that the internal cage (to be made shortly) won't need to have it.
Image
Beaut Utes and 4x4's - Driving your dollar further off road

Call Matt - 0411 563 300

[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

cage

Post by WelchyGQ »

Yeah the tray has a cross brace in it

I dunno if i read the drawing wrong but i thought you could split the cage(bit on the tray, bit inside) but i thought you still had to have some sort of bracing inside - wether it is a cross brace or a taxi bar setup.

Maybe someone can claify this?

As far as i am aware you need the cross brace inside for CAMMS - again i am only goign on the information i have been given. - PLEASE prove me wrong - will make build alot easier!!
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 345
Joined: Wed Dec 24, 2008 11:58 am
Location: Mackay

Post by tye1986 »

team efs qld have a neat internal cage in a single cab sorry i dont have any pics he's still running the standard seats and they were all the way back.
gq coil cab with stuff
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

to clarify, yes you still need a taxi bar but that's a whole lot easier to fit than a cross brace. It needs to be at shoulder height and you run your harnesses over it. That way when you crash, your harness doesn't crush your shoulders into the seat like it would if it were attached just to the floor and through the seat.
Beaut Utes and 4x4's - Driving your dollar further off road

Call Matt - 0411 563 300

[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Post by WelchyGQ »

tye1986 wrote:team efs qld have a neat internal cage in a single cab sorry i dont have any pics he's still running the standard seats and they were all the way back.
anyone have pics of this?
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

cage

Post by WelchyGQ »

bump
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 345
Joined: Wed Dec 24, 2008 11:58 am
Location: Mackay

Post by tye1986 »

im pretty sure a mob called superior alignments did it

Superior Alignments
8 Andrew Campbell Drv, Narangba, QLD 4504

p: (07) 38886988
gq coil cab with stuff
Posts: 15
Joined: Sat May 23, 2009 8:13 pm
Location: Perth

Re: Roll cage into single cab GQ

Post by flat out off road racing »

I race a GQ Single Cab in off road racing (Its actually for sale now) and have got some pics of the car at these sites.
http://www.fjgengineering.com/index.html
http://www.flatoutoffroadracing.com
FJG Engineering is where the cage kit came from and the other site is our race team site so there will be photos all over the place. Im about 6 foot 1 or thereabouts and with the seats (they are saas race seats) as far back as possible against the wall the driving position as pretty much perfect considering the space on offer. For a shorter driver the seat could be moved forward to suit, but you couldnt really get much taller in. The cage meets CAMS requirements, which means it shouldnt have any problems with CCDA. There is no crossbracing internally, only the laterals which are connected to the main hoop, side intrusion bars and windscreen bar.

If you follow this link and watch Episode 10 a few minutes in is a 5 minute segment on the car, shows a bit of footage and you can see a bit more of the car and cage
http://www.wasabitv.com.au/?v=1767&mode=index
hope this helps
cheers, Jason
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Re: Roll cage into single cab GQ

Post by WelchyGQ »

i just tried to send fjg engineering an email but it came back
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 15
Joined: Sat May 23, 2009 8:13 pm
Location: Perth

Re: Roll cage into single cab GQ

Post by flat out off road racing »

works for me???
fjeng@bigpond.com is the email, Id just try again maybe
I notice your from Kalgoorlie. Im pretty sure an FJG cage went to the Bantick Brothers a while back if you want to check out something local from FJG
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Re: Roll cage into single cab GQ

Post by WelchyGQ »

so your cage goes throught the rear wall of the cab?

i am trying to work out if the CCDA rule i posted in my first post means i can keep my existing "half cage" on the tray and get away without a cross brace in the cab.

Cheers,

welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 15
Joined: Sat May 23, 2009 8:13 pm
Location: Perth

Re: Roll cage into single cab GQ

Post by flat out off road racing »

the main hoop is outside the cab and is cross braced. all that is in the cab is the side intrusion bars, the laterals and windscreen bar. The laterals and side intrusion go through the rear wall to connect with the main hoop
There arent side intrusions in this picture, but this is basically it the same as what I have. Just imagine the rear wall is just in front of the main hoop, diagonals, harness bars and rear backstays and its basically what you are looking at.
But I havent studied the CCDA rulebook, this definitely will comply with CAMS, but the kit has been installed into wagons which compete in CCDA comps
Image
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Re: Roll cage into single cab GQ

Post by WelchyGQ »

so if half your cage is mounted to body and the main hoop is mounted to the chassis - wont this cause dramas?

Cheers,

Welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 16
Joined: Sat May 03, 2008 2:18 pm
Location: Melbourne

Re: Roll cage into single cab GQ

Post by Unlimited Industries »

These are some pics of the 4 point that goes in the cab. Another 4 point goes out side and that satisfies the CCDA regs.

The seats go all the way back and rest on the back wall without hitting the cage.

Image

The top tube must go in the recess in the back wall.
Image

This is the bend in the tube required if you are going to be fitting seat belt reels back in.
Image
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Re: Roll cage into single cab GQ

Post by WelchyGQ »

Cheers for that mate.

Has that cage been passed by the ccda? i thought about the way you hae done it but i didnt know if that harness bar needed to be staight or if i ould bend it into the cab.

Is that cage a bolt in? (just looking at the paint work - did you do it before you put the cage back into the car?)

Was the cage from a kit or did you make it form scratch?

Cheers,

Welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 15
Joined: Sat May 23, 2009 8:13 pm
Location: Perth

Re: Roll cage into single cab GQ

Post by flat out off road racing »

WelchyGQ wrote:so if half your cage is mounted to body and the main hoop is mounted to the chassis - wont this cause dramas?

Cheers,

Welchy
It hasnt so far and this car has done well over 2000kms of off road racing in 3 years
Posts: 16
Joined: Sat May 03, 2008 2:18 pm
Location: Melbourne

Re: Roll cage into single cab GQ

Post by Unlimited Industries »

WelchyGQ wrote:Cheers for that mate.

Has that cage been passed by the ccda? i thought about the way you hae done it but i didnt know if that harness bar needed to be staight or if i ould bend it into the cab.

Is that cage a bolt in? (just looking at the paint work - did you do it before you put the cage back into the car?)

Was the cage from a kit or did you make it form scratch?

Cheers,

Welchy
The harness bar is straight except for the ends and is welded in, most of the cage was painted befor it was fitted. If you are going to do a harness bar like this one, make sure you leave enough room between the back wall and bar to get the harness past, it's a tight fit.

This particular cage doesn't meet the CCDA requirements as there are some roof bars that would need to be fitted and that would be all.

This cage is fully fabed and not a kit.
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Re: Roll cage into single cab GQ

Post by WelchyGQ »

i though that harness bar had to be straight to pass CCDA.
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 83 guests