attn newy boys

Post by **stumped** » Thu Mar 18, 2004 8:19 am

know it's a long shot, but thought i'd try....

i've gotta get my zook (88 WT) thru rego by the 22nd, hoping to get it done this sat, but if necessary, i'll take it off the road for a week or two...

to fit the 31s, i needed to cut the bar that holds the factory bumper on (bit of tube that connects the chassis rails that has a plate on the end for the bumper to screw into...). to get it thru rego i need to attach some kind of bar to the front....

does anyone have a bar that i could borrow to get thru rego? would need to bolt on to the chassis rails or something....

you'd have my eternal gratitude and there'd be a case in it if u want

cheers,

steve

Post by **redzook** » Thu Mar 18, 2004 9:57 am

cant u put the stock bar back on there?

i ran my stock bar with the bit of tube cut off.

i have a stock bar here if you want it

Post by **stumped** » Thu Mar 18, 2004 10:02 am

i've got a stock bumper... it only attached to the bits i cut off at the end of that tube thing (what do ya call it??)... we're looking into options of making some kind of bracket to hold it in place, but i dunno how well that'll work.

is the stock bar different? how does it attach?

Post by **redzook** » Thu Mar 18, 2004 10:15 am

just went an had a look it bolted to the bullbar (preerunner bar thing)

ive got that here if you get stuck an need it

Post by **stumped** » Thu Mar 18, 2004 10:25 am

lol.... ya don't wanna lend me ur ARB bar??

Post by **redzook** » Thu Mar 18, 2004 10:33 am

stumped wrote:lol.... ya don't wanna lend me ur ARB bar??

do u wana lend me some money

Post by **stumped** » Thu Mar 18, 2004 2:13 pm

told you i wanted to buy it if ya were getting a tube bar

can put a deposit on it if ya don't trust me

Post by **camskizook** » Thu Mar 18, 2004 2:19 pm

u can borrow mine for a sec when you wanna do it.......providing i dont need my car...its only 4 bolts to pull it off

Post by **stumped** » Thu Mar 18, 2004 2:54 pm

that'd be sweet cam... thanks. should be getting it rego'd on saturday, but i'll have to get back to ya with definates. can ya PM ur mobile so i can get in contact wit ya when i know for sure??

Post by **mtzook** » Sat Mar 20, 2004 4:59 am

Nearly everyone who has any kind of oversized tires on theirs has cut that bar off. If you did it neat enough, no one would bother you, i'm sure. I had mine cut, then engineered, but he didn't put it in the report, and he wasn't concerned. I needed it off when i put on the ARB winch bar.

I wouldn't worry too much unless they tell you you have to do something about it....

My 2cents

Post by **stumped** » Mon Mar 22, 2004 10:18 am

mtzook wrote:I wouldn't worry too much unless they tell you you have to do something about it....
My 2cents

wasn't worried 'bout the cuts, we did that nice and put fence caps onto the ends. it was the legality of running without the licence plate and blinkers properly attached.

is all good now, got it thru rego :armsup:

thanks for the offer again cam!

Post by **camskizook** » Mon Mar 22, 2004 10:25 am

stumped wrote:
mtzook wrote:I wouldn't worry too much unless they tell you you have to do something about it....
My 2cents

wasn't worried 'bout the cuts, we did that nice and put fence caps onto the ends. it was the legality of running without the licence plate and blinkers properly attached.

is all good now, got it thru rego

thanks for the offer again cam!

No wuckers :cool:

Outer Limits 4x4 Board

attn newy boys

attn newy boys

Who is online