Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what clutch and flywheel to use on v8 304

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 125
Joined: Wed Nov 24, 2004 8:47 pm

what clutch and flywheel to use on v8 304

Post by bundy4x4 »

I'm building a hilux with a 304 efi and want to know what people are using or info on what type of clutch has anyone used http://www.sunburybrakes.com.au/index.htm flywheels and pressure plate or should i just go for Holden flywheel and pressure plate am using a vs v8 SS motor
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

GMH flywheel, 10" dyna 21 spline h/duty clutch plate, Exody Sports Tuff 10" GMH clutch.


Cheers
Top
Posts: 147
Joined: Sat Aug 04, 2007 1:28 pm
Location: Sydney

Post by little rusty »

marks adapters recommends standard holden clutch in landcruiser application. When I replaced the clutch the idiots put a heavy duty one in and was useless compared to the standard... cant exlpain it though. Would therefore go standard flywheel too. Not sure what you would achieve going for something else... if it fits in the adapter set up use the clutch from the holden/donor vehicle...
even when you spell out commonsense to the RTA they still ignore it!
Top
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Re: what clutch and flywheel to use on v8 304

Post by cruiser60series »

i know nothing about holden v8s but i bought a clutch for my girlfriend from sunbury brakes and they were a good mob to deal with. Fast delivery no fuss etc.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Top
Posts: 125
Joined: Wed Nov 24, 2004 8:47 pm

Re: what clutch and flywheel to use on v8 304

Post by bundy4x4 »

i might go with sunbury clutch as i can't find a flywheel from a wrecker and holden don't have any more stock would a billett steel be good as they are lighter aswell
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Re: what clutch and flywheel to use on v8 304

Post by Struth »

bundy4x4 wrote:i might go with sunbury clutch as i can't find a flywheel from a wrecker and holden don't have any more stock would a billett steel be good as they are lighter aswell
A lighther flywheel will allow the engine to stall easier when off road.


Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 7 guests