Howdy,
This has probably been mentioned before but my bell housing is cracked and I was wondering if anyone knows where one can be bought?
Daihatsu have discontinued them and was told about a coy in Victoria called Dello Housings that makes aftermarket ones but can't find them anywhere on the net or in the White Pages online.
Any assistance would be appreciated.
By the way... I don't know how bad the crack is... will be looking at it tonight.
Cheers
Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bell housing
Moderator: Tiny
Bell housing
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
murcod wrote:www.dellowauto.com.au
Have you thought about getting it welded? Or is it beyond repair?
Legend! I knew I probably wasn't spelling it right. Will have a look at it tonight and post some pics to see what you guys think. Just have to find a place in Sydney that could possibly do the repair.
Cheers
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Don't go getting too excited- I had a browse and they don't make anything to suit the Feroza that I could see.
Hi Paul,
From memory the feroza's gear box does not have a bellhousing that is seperate from the main case. I think its a one piece cast aluminim case.
If you cant get it welded, then try getting one from the wreckers and just mix and match all the best parts out of the two gear boxes. Using all new bearings of course.
good luck
rod
From memory the feroza's gear box does not have a bellhousing that is seperate from the main case. I think its a one piece cast aluminim case.
If you cant get it welded, then try getting one from the wreckers and just mix and match all the best parts out of the two gear boxes. Using all new bearings of course.
good luck
rod
Dont expect mere proof to sway my opinion.
Well.... I'll have to see how it goes tomorrow. Anyway still going Saturday. Will just avoid the mud holes.... 
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
rOd wrote:Hi Paul,
From memory the feroza's gear box does not have a bellhousing that is seperate from the main case. I think its a one piece cast aluminim case.
If you cant get it welded, then try getting one from the wreckers and just mix and match all the best parts out of the two gear boxes. Using all new bearings of course.
good luck
rod
Looks like you may be right rod... had a look at a back issue of $WD monthly that had the article on buying ferozas.
Theres a pic of a guy holdig up a box & transfer case and it looks like the bell housing is part of the gear box casing... hmmm
didnt get a chance to look at the crack as I got home at night.
The cars at the mechanic today gettin a service so will get under there tonight and have a look see....
Cheers
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
I Just took a look at my old trans laying on ground in the backyard the bell housing is one piece. Weld it mine was welded and i had no more problem with it wat killed the old one was i could not get the drive shaft to seal at the transfer case and was always having to add fluid. Guess I let it go to far one time and fraged the gears.
If I wanted to Play it safe I would Have Stayed at home
Who is online
Users browsing this forum: No registered users and 1 guest