Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear 80 Series Locker

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1
Joined: Sun Nov 29, 2009 8:43 am
Location: OXENFORD, GOLD COAST

Rear 80 Series Locker

Post by tough_lux »

hey guys
just wondering if anyone elses rear arb air locker in there 80series landcrusier is leaking oil out of the filter on the compressor under the bonnet?
or even your front locker is your hilux?
3 of my mates have dramas in there 80s and just wondering if anyone else has had this problem?
thanks
chris
Posts: 98
Joined: Thu Aug 04, 2005 6:57 pm
Location: Sydney

Re: Rear 80 Series Locker

Post by JeSTeROCK »

A mate of mine installed the air locker himself and had the same problem.

We thought it was a breather problem but it ended up being a seal in the locker not being installed correctly. Took it to ARB and they fixed it.

I have a patrol with the compressor under my seat. I didn't want diff oil smell inside so I had the installer put purge valves in.
88 GQ SWB 6" Lift 35s + a few scars
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Re: Rear 80 Series Locker

Post by crankycruiser »

My rear arb has done this for years, have tried new seals the breather and it always comes back..

So i fitted a purge valve, No more problems! :armsup:
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Posts: 166
Joined: Tue Mar 04, 2008 4:04 pm
Location: SW Victoria

Re: Rear 80 Series Locker

Post by djroberts »

i have that problem.

normally, i think, it is to do with incorrect installation but occasionally tolerances can also be an issue. mine is an early one and from measurements off the deal housing and the face it runs on the o-rings used are out of tolerance.

if it is old, seals can get hard and start to leak.

this is fairly common with the air locker.


my 2c, D.

mmmmmmmmmm oh, baby
loose as a goose
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests