put in a part time kit in my 80 gxl and it came with avm hubs what to use factory toyota ones instead, a solid axle hi lux will fit but wondering if early ifs will be the same or from a 75 ute will fit.
thanks guys
chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
what free wheel hubs can i use
Moderators: toaddog, Elmo, DUDELUX
what free wheel hubs can i use
80 series 6inch lift f&r air lockers 34 jt'2s homemade endless air f&r bars dwr unit rock slidder bars and lots of other goodies
Re: what free wheel hubs can i use
hi mate all solid axle toyota will fit. ifs wont as im pretty sure all of them a 27 spline. all the rest a 30. 75 series will fit for certain. im running 60 on myne just waiting for my viscious coupling for my box.
My hj47-80series build
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
Re: what free wheel hubs can i use
what year model 80 do you have ?
you will need to check the drive spline length they went to a longer spline end of 92 -93 i think ,same time as 16 inch wheels and big brakes and 4.5 were introduced
this was to try and stop spline wear in the full time models
all part time models ran the shorter spline
see what you have then work out if you need to cut your cv's and re-grove them
you can get spacers but i would not recommend them as they weaken the already weak link of your cone washer stud set up
you will need to check the drive spline length they went to a longer spline end of 92 -93 i think ,same time as 16 inch wheels and big brakes and 4.5 were introduced
this was to try and stop spline wear in the full time models
all part time models ran the shorter spline
see what you have then work out if you need to cut your cv's and re-grove them
you can get spacers but i would not recommend them as they weaken the already weak link of your cone washer stud set up
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
1hdfte 80 series
LHD fz 80 series GX
Re: what free wheel hubs can i use
In the process of doing mine at the momment, i just bought 1hzj75 hubs, no problems.
Re: what free wheel hubs can i use
I have solid axle lux ones on my 80..
It was 94-95 that the 80's came with longer cv's. NOT when they updated motors, as mine was 4.5 with the short cv's. BUT even if u have an 80 with the long cv's, u can cut 5mm off the end of the cv stub with a grinder and then put a new groove round the cv shaft with the grinding blade for the c clip... is a piece of piss to do!
It was 94-95 that the 80's came with longer cv's. NOT when they updated motors, as mine was 4.5 with the short cv's. BUT even if u have an 80 with the long cv's, u can cut 5mm off the end of the cv stub with a grinder and then put a new groove round the cv shaft with the grinding blade for the c clip... is a piece of piss to do!
80 xtra cab
Supercharged LS1, Locked n shit
80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Supercharged LS1, Locked n shit
80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Re: what free wheel hubs can i use
Thanks guys yep mines late 94 4.5 petrol with 16 inch rims, kit came with the spacers to go on the end of the cv will chase down some factory ones second hand
80 series 6inch lift f&r air lockers 34 jt'2s homemade endless air f&r bars dwr unit rock slidder bars and lots of other goodies
Re: what free wheel hubs can i use
PMT wrote:In the process of doing mine at the momment, i just bought 1hzj75 hubs, no problems.
I've fininshed mine & yep axles too long being a 97 model, does anyone know of a toyota hub that will fit or do i have to cut the axles back?
Who is online
Users browsing this forum: No registered users and 88 guests