Out of curiosity are the internal gears from the center of a 80 series front and a 60 series front interchangeable in an ARB diff lock?
I know it is possible to swap the gears between the nissan center and the 80 center, but don't know about the two landcruiser variants.
Any info would be awesome.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
diff gears 60/ 80
Moderators: toaddog, Elmo, DUDELUX
diff gears 60/ 80
MUD, MUD, GLORIOUS MUD!
Re: diff gears 60/ 80
Mate I think the rears are the both the 9.5 inch diff, but the 80 series front would be a high pinion reverse cut 8 inch diff, where as the 60 series would be the same as the rear. Do a bit of a search and I'd imagine you'd be able to confirm this.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295
bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Re: diff gears 60/ 80
Yeah mate it is a 9,1/2 front, that why I want to try and fit an 80 axle inside a 60 series diff. I have access to mills lathes and other nice machines to mod the diff, but was not sure if the spider gears were interchangeable between the two ARB centers.
MUD, MUD, GLORIOUS MUD!
Who is online
Users browsing this forum: No registered users and 3 guests