Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bush opinions

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Bush opinions

Post by BlueSuzy »

Hi all, Not usually in this section :D

Coil converting a lwb sierra, Custom 4 link/3link

I'm after some opinions on these and details on patrol bushes.

http://cgi.ebay.com.au/NISSAN-GQ-GU-PAT ... 4a9d27d1c4" onclick="window.open(this.href);return false;


What bolts do patrols normally run, Fine M12?M14?

I will probably have to buy 2 kits, Anyone know of cheaper poly kits?
I am Tim
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Re: Bush opinions

Post by oldmate »

That's about as cheap i've seen poly bushes in the retail market. Downsides are they tend to squeak abit, and don't flex as good as the bonded rubber type ones standard nissan use. Although the difference is mainly noticeable in a radius arm link setup, moreso than a 5, 4 or 3 link wich has alot less binding by design.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Re: Bush opinions

Post by chunks »

Rubber will give more flex. Also when poly bushes wear they elongate the inner bore where the crush tube goes through and it ends up with too much movement.
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Bush opinions

Post by BlueSuzy »

Rubber seems to be alot dearer per bush. Im going to need at least 16 bushes. So they add up... Any one know what rubbers are worth other than ebay?

Stil after the bolt diameter. Anyone know? :D
I am Tim
Posts: 77
Joined: Mon Apr 14, 2008 2:18 pm
Location: Maryborough qld

Re: Bush opinions

Post by Articulator »

Hi mate bolts are 14mm. factory bushes are best.Best ive found them for was $30 each through PATROLAPART.com.au and visit there ebay store.cheers
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Bush opinions

Post by BlueSuzy »

Found them:

http://cgi.ebay.com.au/Nissan-Patrol-Re ... 5193febd81" onclick="window.open(this.href);return false;

Hmm, Still expensive. Might have to see what my mate can get them through trade.
I am Tim
Posts: 1183
Joined: Tue Sep 22, 2009 10:24 pm
Location: In the Hills With a Riffle

Re: Bush opinions

Post by V.W.Dave »

Timmy I have told you a few times now..... If you need any parts that you mum can't get let me know.
Send me a PM of what your after. I have a Pedders shop owner that sells to me at cost. Its interesting what people do to try to be the snap on mans mate :armsup:
I got a full set of 8 HD long U-bolts for mine last week for all of $40 retail was $120
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Re: Bush opinions

Post by chunks »

Want to sell me a roll cab for cost? :D
Posts: 1183
Joined: Tue Sep 22, 2009 10:24 pm
Location: In the Hills With a Riffle

Re: Bush opinions

Post by V.W.Dave »

chunks wrote:Want to sell me a roll cab for cost? :D
I am a company store not a franchise. I can sell it to you for ta price but that about as low as I can go. I have a boat load of trade in I can do cheap though...
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Re: Bush opinions

Post by chunks »

Haha just kidding mate, I'm in the trade, currently in negotiations with my Snap On dealer for a new top and bottom box.
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Bush opinions

Post by BlueSuzy »

Just done a deal for 16 @ $20 Each! :armsup:

Rear arms, Rubber/metal outer

Thanks Patrolapart :armsup:
I am Tim
Posts: 138
Joined: Tue Nov 06, 2007 6:39 pm
Location: Noosa

Re: Bush opinions

Post by Dominator »

$20 per bush FTW. I now know where i will be going when i go coils on the zook.
Tow Rig - 4.2 Turbo Deisel GQ. 5in coils, 2in body, f&r tube bars, sliders, 35's.

Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Re: Bush opinions

Post by SuperiorEngineering »

Poly is absolute rubbish on any suspension part that has to flex,( okay on street cars ) it's like super cheap tools , buy them because they are cheap , realise you just wasted your money when their stuffed in a month or so and listen to people who actually know and wish you bought the right parts first time.
We do not waste in excess of 30k per month on genuine rubber bushes because we like to throw money away but we know from experience that poly fails extremely quick on 4wd's and warranties would cost us more than it is worth.

Do not purchase poly bushes but spend the money on genuine rubber bushes, if poly was any good why does not a single manufacturer use them on new vehicles and spare parts sales ????
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Bush opinions

Post by BlueSuzy »

So i made the right decision! :armsup:
I am Tim
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests